Showing 21–40 of 277 results
Filtri
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Electrical contact cleaning oil
- Removes corrosion and oxidation (oxides, sulfates, sulfides, carbonates)
- Dissolves grease, oil, and resinous contamination
- Rapid evaporation
- Non-corrosive
- Contains corrosion inhibitor
- Provides long-lasting lubrication
- Protects contacts after cleaning
- Safe on metal surfaces (non-staining)
- Safe on most rubbers, plastics, and coatings
- (preliminary testing recommended on sensitive materials)
- 360° spray valve (can be used upside down)
- High-purity CO₂ propellant (95% active content)
- Do not use on energized equipment
- Professional technical spray
-
- Precision cleaner for electrical and electronic contacts
- Removes dirt, residues and contaminants from contacts
- Leaves no residue after application
- Fast drying
- Suitable for cleaning electronic boards
- Specific for electrical and electronic equipment
- Non-corrosive
- Developed for components that do not tolerate aqueous cleaners
- Do not use on energized equipment
- Professional technical spray
-
- High-performance release agent for direct food contact
- Multi-purpose lubricant for food processing equipment
- Stable and long-lasting lubrication of moving parts
- Non-stick properties to prevent food adhesion to surfaces
- Protection against corrosion
- Non-toxic and odorless
- Safe for use in food production areas
- Silicone-free
- Halal certified
- Professional technical spray
-
- PTFE-based dry lubricant
- Dry, clean, and non-sticky lubricating film
- Does not attract dust or dirt
- Significantly reduces the coefficient of friction
- Excellent non-stick and release properties
- Oil-free and grease-free formulation
- Non-staining and does not form sludge
- Adheres to metal, plastic, rubber, wood, and glass
- Stable over a wide temperature range
- Resistant to water and chemicals
- Ideal for low speeds and light loads
- Fast drying (approx. 15 minutes)
- Professional technical spray
-
- High-performance, long-lasting synthetic lubricant for ejector pins
- High lubricating power even under extreme conditions
- Suitable for high temperatures, high pressures, and high linear speeds
- Eliminates seizing issues for ejector pins and slides
- Prevents grease migration and contamination on the cosmetic side of molded parts
- Promotes gas sealing at the ejector level
- Does not carbonize and leaves no deposits or black marks on finished parts
- Good penetration capability
- Compatible with steel/steel, steel/bronze, and steel/aluminum pairings
- Professional technical spray
-
- High-performance industrial degreaser
- Fast-acting with quick drying
- Removes grease, oils, lubricants, tar and adhesives
- Leaves no residue
- Rapidly penetrates and removes dirt and moisture
- Non-corrosive and non-staining on metals
- Acetone-free formula
- Free from chlorinated solvents
- Compatible with most plastics
- Improves overall performance of treated surfaces
- Readily biodegradable (OECD 301B: 62%)
- 360° spray valve (can be used upside down)
- High-purity CO₂ propellant (active content >95%)
- Suitable for industrial use, including food processing (NSF)
- Professional technical spray
-
- Removes self-adhesive paper labels in 2-3 minutes
- Leaves no residue after evaporation
- Non-corrosive
- Non-conductive
- Does not scratch surfaces
- Reduced odor
- Can be used with precision straw
- 360° application (even upside down)
- Professional technical spray
-
- High-efficiency cleaner for industrial moulds
- Removes grease, oil, wax, and release agent residues
- Removes carbonized polymer residues
- Fast and effective action
- Fast evaporation without leaving residue
- No rinsing required
- Compatible with metal surfaces
- Ready to use
- Silicone-free
- Professional technical spray
-
- Long-term transparent corrosion inhibitor
- Protection for moulds and tools during storage and transport
- Forms a high-coverage waxy protective film
- High coverage capacity even with a thin layer
- Repels moisture from metal surfaces
- Effective protection against water and oxygen
- Silicone-free
- Chemically inert on ferrous and non-ferrous metals
- Non-drip, stable even on vertical surfaces
- Easily removable before returning to service
- Professional technical spray
-
- High penetrating power
- Fast action on seized mechanisms
- Loosens rusted nuts, bolts, and components
- Disperses rust, oxides, and residues
- Reduces component wear
- Facilitates disassembly
- Compatible with metals, plastics, and rubbers (preliminary testing recommended)
- Silicone-free
- NSF H1 registered for use in food processing environments
- Nut-derivative free
- Professional technical spray
-
- Heavy Duty Mold Cleaner
- High-efficiency solvent blend
- Weakens and dissolves hardened and carbonized polymers
- Removes plastic, rubber and resin residues
- Effective even on carbonized polymer residues
- High-adhesion foaming substance that stays in place
- Softens hardened polymers
- Enables deep cleaning of mold surfaces
- Ideal for cleaning molds before storage
- Leaves the surface clean and dry after application
- Professional technical spray
-
- Light lubricating oil for universal use
- Formulated for frequent start-up situations
- Contains PTFE for friction reduction
- Long-lasting protection against wear and friction
- Effectively protects against corrosion
- Reliable lubrication even in repeated start/stop cycles
- Reduces seizing and deterioration of metal surfaces
- Professional technical spray
-
- Heavy-duty indoor corrosion inhibitor
- Up to 2 years indoor corrosion protection
- Thin, penetrating, and non-drying film
- High coverage on flat surfaces and sharp edges
- Long-term lubricant for parts subject to continuous wear
- Displaces moisture
- Suitable for all metal alloys, including copper and brass
- Easily removable with solvents, alkaline cleaners, or steam
- Facilitates easy machinery restart after storage
- Ideal as a final protective film for completed assemblies
- 360° spray valve, usable even upside down
- Non-flammable CO₂ propellant
- 95% active content
-
-
Effectively removes fondants and sugar-based residues
-
Quickly dissolves sugars and derivatives
-
Rapidly penetrates deposits
-
Leaves a light lubricating film that inhibits re-adhesion
-
Helps prevent sugar build-up on fasteners
-
Contains no vegetable oils or nut derivatives
-
Suitable for maintenance on processing and packaging lines
-
Do not use on energized equipment
-
Professional technical spray
-
-
- Special compound for metal working
- High adhesion between tool and workpiece
- Extreme pressure (EP) resistant
- Forms a tough, resistant film during machining
- Reduces tool wear
- Improves surface finish
- Dissipates heat during cutting
- Extends tool life
- Reduces production waste
- Suitable for stainless steel and high-strength steel
- Perfect for turning, drilling, reaming, tapping and threading operations.
- Professional technical spray
-
- High-performance non-chlorinated tapping lubricant
- Blend of highly refined base oils and synthetic additives
- High lubricating capacity with excellent cooling properties
- Anti-welding properties
- Reduces friction and wear, increasing tool life
- Improves surface finish
- Reduces operating temperatures
- Enables higher operating speeds
- Chlorine-free additive system
- Free of active sulfur
- Aerosol formulation with non-flammable propellant system
- 360° spray with extension tube for precise application
- Professional technical spray
-
- Two-component fire-resistant RTV silicone foam
- Two-component room temperature vulcanizing (RTV) silicone foam
- Fire resistant
- Good flexibility even under severe operating conditions
- Withstand high temperatures
- Designed to limit hazards such as smoke, flames and gases.
- Expands and cures at room temperature to form a closed-cell foam elastomer.
- Designed for creating fire-resistant seals in penetrations and linear joints.
-
- One-part dielectric gel
- Transparent
- Hot polymerization
- Low viscosity
- Very soft gel
- Suitable for PCB potting and electronic component protection
- Electrical insulation and environmental protection
- Extended temperature range (-60°C / +200°C)
- No mixing required
-
- No exotherm during curing
- Room temperature or heat-accelerated polymerization
- High stability during thermal cycles up to 150°C (peak 175°C)
- Maintains vertical position
- Controlled low silicone volatility
- Soft and elastomeric material after polymerization
-
- Non-curing
- High thermal conductivity
- Stable on vertical surfaces
- Gap filling capacity up to 1.0 mm
- Thermally conductive silicone material
- Low thermal resistance and good high-temperature stability
