Brands

Molykote: special industrial lubricants
Molykote® lubricants were created to solve the most severe and difficult lubrication problems where traditional lubricants fail.
More than 65 years of success
Formulated to optimize lubrication, machinery reliability and energy-saving solutions, Molykote® products, with 65 years of success and systematically developed into new and innovative technologies, are recognized as leaders worldwide.
Molykote® Specialty Lubricants
- You can count on Molykote® specialty lubricants in both production and maintenance to control friction, reduce wear, conserve energy, extend lubrication intervals, increase the reliability of manufactured goods, and keep plant productivity high.
High performance
- Molykote®’s wide range of high-performance specialty lubricants is the most effective solution to meet your industrial lubrication needs with extreme loads, temperatures and speeds in even the harshest environments.
Products
All products Molykote
Filter products by their attributes: brand, technology, applications…
Molykote® Product Families
The Molykote range includes several products, here are some of them
Pastes
- The pastes consist of a high concentration of solid lubricants in oil to facilitate application. In cases where oils and greases are moved away from the contact points to be lubricated, the solid lubricants in the pastes instead form an adherent and tenacious film that prevents wear under extreme loads and low speeds. The main types are screw pastes, assembly pastes, and greasy pastes, and the applications are during assembly and break-in.
Greases
- It doesn’t matter what your industry is: food, chemical, mechanical or other. We have the right products and services to improve your production. A lubricating grease is a semi-solid product composed of a dispersion of a thickening agent in a fluid lubricant. Lubricating grease works by releasing lubricating fluid from the condenser and provides lubrication where the use of an oil is not practical or possible. Molykote® high-performance lubricating greases are designed and engineered for use in extreme conditions such as high pressures, aggressive chemical environments, very high or low temperatures and at all possible speeds. In addition, Molykote® greases have mineral oils or synthetic fluids at their base, including silicone oils. A good number of Molykote® greases contain special additives and/or solid lubricants such as molybdenum disulfide to provide very effective lubrication.
Compounds
- Silicone compounds are grease-like lubricants containing silicone fluids, thickened with inert amorphous silica. They are resistant to oxidation and thermal degradation and maintain their properties over a wide temperature range. They are designed as release agents and can be used as assembly lubricants for O-rings, electrical current insulators, sealants that do not harden, and to lubricate rubber and plastic parts. Silicone compounds can be used in applications where they have the dual function of sealing and lubricating.
Coatings
- Molykote® AFC (Anti-Friction Coating) coatings are similar to paints. Instead of a colored pigment, they contain micronized particles of solid lubricants dispersed in carefully selected mixtures of resins and solvents. Important for lubrication and corrosion protection properties is the choice of raw materials and the volume concentration of solid lubricants contained. In addition to greases and oils, or where possible as a replacement for Hydrodynamic lubricants, Molykote® AFC coatings form a lubricating film that helps cover surface roughness and protect against friction of one surface against the other (e.g., metal-to-metal, plastic-to-plastic) even under extreme loading conditions. They are applied by conventional painting systems such as: spraying, brushing, dipping and centrifuging.
Solvents
- Molykote® solvents can be used to degrease and remove residues such as oils and greases, as well as to change the viscosity of AFC Coatings. These products are also designed to clean equipment used for applying coatings.
Dispersions
- Molykote® dispersions are finely dispersed solid lubricants or other lubricants suspended in lubricating fluids. They are used when it is necessary to apply solid lubricants in liquid form to units in operation or in hard-to-access places. Some dispersions serve as anti-wear and extreme pressure additives for gear and engine oils.
Other products
- The Molykote® family of lubricants is completed with a range of sprays, and fluids for special applications. These products are designed to cover a wide temperature range, for corrosion protection; good adhesion strength and load resistance.
Molykote® Product Applications
Molykote is applied to a variety of surfaces; you can find some of them in these tabs
Bolts and screws
Problem reported |
Requirements |
MOLYKOTE Solution |
Contact corrosion and seizing on austenitic stainless steel bolts | White assembly paste | D |
Black metal-free mounting paste | P 74 | |
Dry lubricant coating | D 321 R | |
Contact corrosion and seizing on bolts with galvanized surfaces | Need to perform assemblies with low torques | G-Rapid Plus |
Need to be able to apply dry lining | D 321 R | |
Breakage on bolts and scoring on threads caused by non-uniform coefficient of friction | Need to make assemblies with uniform torques | 1000 |
Dry lubricant coating | D 7405 | |
Contact corrosion and seizure on bolts exposed to medium-low temperatures and corrosive environments | Metal-free lubricating paste | P 40 |
Cracks on bolts caused by stresses on threaded surfaces | Threads exposed to high temperatures | P 37 |
Bolt seizure or breakage caused by the use of unsuitable lubricants | Multipurpose copper paste | CU 7439 Plus |
Bolt seizure or breakage caused by high temperatures and corrosive environments | Anti-seize paste for high temperatures | HSC Plus |
Chains
Problem reported |
Requirements |
MOLYKOTE Solution |
Marked wear and limited service life due to high temperatures or loads | Synthetic adhesive/low-friction chain oil, suitable up to temperatures of + 250°C | L 1428 |
Solvent-free chain oil suitable for high temperatures | CO 220 | |
Marked wear and limited service life due to insufficient lubrication at high speeds | Adhesive lubricant for chains with MoS2 up to + 160 °C | MKL-N |
Marked wear and limited service life due to extreme temperatures or high loads | Dry lubricant with solid lubricants suitable for temperatures up to +450°C | M 30 |
Marked wear and corrosion due to high loads and from wet environments | Black chain lubricant, suitable for grease nipples | 1122 |
Adhesive paste for normal and stainless steel chains | P 40 | |
Marked wear and corrosion due to exposure to high amounts of water | High resistance to emulsion in water High film resistance | L-1460FG |
Marked wear and limited service life due to very low temperatures | Suitable for food contact Pour point < -60°C | L-1468FG |
Metal slide bearings
Problem reported |
Requirements |
MOLYKOTE Solution |
Jerky feed forward and damage caused by assembly and break-in |
Dry lubricant coating | D 321 R |
Assembly paste for pre-treatment | G-n Plus | |
Assembly paste for pre-treatment | G-Rapid Plus | |
Pre-seize, scoring and high wear, limited life under high loads | Multi-purpose grease with MoS2 | BR 2 Plus |
MoS2 grease for extreme pressures | Longterm 2 Plus | |
Synthetic grease with MoS2 for temperature up to 170°C | G-4700 | |
Reduced lubrication life and intervals in the presence of moisture | Long-lasting and waterproof white grease | Longterm W2 |
Extreme pressure and water resistant grease | Longterm 2 Plus | |
White synthetic grease H1 for temperatures up to 150°C | G-4500 | |
Metal-free lubricating paste | P 40 |
Plastic slide bearings
Problem reported |
Requirements |
MOLYKOTE Solution |
Damage caused by break-in jerky advance, pre-cracking and seizing | White synthetic grease with solid lubricants | EM 30L |
Synthetic grease paste for extreme pressures | PPE | |
High wear, stiffness, stress cracking, swelling, shrinkage, loss of hardness caused by inadequate lubrication, limited service life due to high temperature or loads | White silicone grease for wide temperature ranges | PG 21 |
White silicone grease with solid lubricants with extreme pressures | EM-30L | |
White silicone grease with solid lubricants | PG 54 | |
Semi-synthetic general purpose grease | PG 75 | |
Synthetic zero oil separation anti-noise grease | G-1056 | |
Synthetic grease with solid lubricants for extreme pressures | YM-103 |
Rolling Bearings
Problem reported |
Requirements |
MOLYKOTE Solution |
Limited bearing life due to high loads | Multipurpose grease with MoS2 | BR 2 Plus |
Extreme pressure and water resistant grease | Longterm 2 Plus | |
Synthetic grease with MoS2 for temperature up to 170°C | G-4700 | |
Need to use bearings at extremely low temperatures | Medium-low loads and speeds (-70°C) | 33 |
Synthetic grease H1 (-40°C) | G 4500 | |
Limited durability due to high temperatures | Medium-low loads and medium-low speeds (160°C) | FB 180 |
Synthetic grease with MoS2 for temperature up to 170°C | G-4700 | |
Limited service life due to high temperatures (>180 °C) | Medium to high loads and high speeds | BG 20 |
Limited service life due to very high temperatures (>200 °C) | Medium-low loads and speeds | 44 |
Limited service life due to extremely high temperatures(>250°C) |
Ability to withstand solvents and other aggressive chemicals | HP 870 |
High temperature resistance and extremely long service life | G 9000 | |
Limited service life due to extremely high temperatures(230°C) | Severe-duty, chemical-resistant grease | FS 3451 |
Need to use the bearings under high vacuum conditions | Operating temperatures between -35 and + 250 °C | HP 300 |
Lubrication problems due to aggressive environment | Operating temperatures ranging from -35 to + 250 °C | HP 870 |
Operating temperatures ranging from -35 to + 250 °C | HP 300 | |
Usage temperatures ranging from -40 to + 200 °C | FS 1292 | |
Operating temperatures ranging from -40 to + 230 °C | FS 3451 | |
Noise | Operating temperatures ranging from -40 to + 150 °C | BG 555 |
Sliding guides
Problem reported |
Requirements |
MOLYKOTE Solution |
Jerky feed forward and damage caused by mounting and break-in | Adhesive mounting paste for pre-treatment | G-n Plus |
Assembly paste for pre-treatment | G-Rapid Plus | |
Multipurpose grease with MoS2 | BR 2 Plus | |
MoS2 grease for extreme pressures | Longterm 2 Plus | |
Pre-gripping, scoring and high wear, limited life under high loads | Medium-duty multipurpose grease suitable for food contact H1 | G-4500 |
Synthetic grease for high loads on metal parts | G-4700 | |
Semi-synthetic general purpose grease | PG 75 | |
White silicone grease with solid lubricants for extreme pressures | EM-30L | |
Silicone grease for plastics suitable for high temperature ranges | 33 | |
Reduced lubrication life and intervals in the presence of moisture | Long-lasting and waterproof white grease | Longterm W2 |
Extreme pressure and water resistant grease | Longterm 2 Plus | |
Contact corrosion | Metal-free lubricating paste | P 40 |
White solid lubricating paste | DX | |
Adhesive lubricant against contact corrosion | G 67 |
Open gears
Problem reported |
Requirements |
MOLYKOTE Solution |
Wear, pitting or marked corrosion on sprockets used at low to medium speeds ( up to 2ms) | Adhesive mounting paste for pre-treatment | G-n Plus |
Pre-treatment with solid lubricants | G-Rapid Plus | |
Contact corrosion protection | TP 42 | |
Adhesive grease against contact corrosion | G 67 | |
Protection against wear and tear caused by high loads | 165 LT | |
Metal-free lubricating paste | P 40 | |
Synthetic grease with solid lubricants | 1122 | |
Marked wear, pitting or corrosion on sprockets used at high speeds ( up to 6ms) | Spray grease with good resistance to water and moisture | S-1004 |
Adhesive grease for applications in harsh conditions | 1122 |
Closed gears
Problem reported |
Requirements |
MOLYKOTE Solution |
Damage caused by break-in, jerky advance, pre-seize and seizure | White synthetic grease with solid lubricants | EM 30L |
Grease for lubrication of plastic-filled materials | G-1060 G-1074 | |
Marked wear and limited service life caused by high temperatures or loads, swelling problems, shrinkage, rupture from stress corrosion, changes in strength characteristics due to insufficient amount of lubricant | White silicone grease for wide temperature ranges | PG 21 |
White silicone grease with solid lubricants for extreme pressures | EM-30L | |
White silicone grease with solid lubricants | PG 54 | |
Semi-synthetic grease for closed gears i plastics and steel | G 68 | |
Semi-synthetic general purpose grease | PG 75 | |
Synthetic grease with solid lubricants for extreme pressures | YM-103 | |
Synthetic zero oil separation anti-noise grease | G-1056G-1057G–1067 |
Estates
Problem reported |
Requirements |
MOLYKOTE Solution |
Damage caused by aggressive environments | Ability to withstand solvents and other aggressive chemicals | HP 870 |
Solvent and gas resistant silicone compound | 111 Compound | |
Chemical-resistant fluorosilicone grease | FS 3452 | |
Shrinkage, swelling and tensile failure problems caused by incompatible lubricants | White synthetic grease with solid lubricants compatible with many types of plastics | EM-30L |
Synthetic grease with noise damping properties | EM-50L | |
Synthetic low-temperature grease compatible for many types of plastics | EM-60L | |
Synthetic grease compatible with many types of plastics capable of protecting components from stress corrosion cracking | HP 870 | |
General purpose silicone compound | 111 Compound | |
Silicone grease with PTFE approved for drinking water | G-5511 |
Latest articles Molykote
Sign up for newsletter to receive upcoming articles
Read I PDF Molykote
- 🇮🇹 MOLYKOTE® high-performance industrial lubricants
- 🇮🇹 Lubricants for threaded connections
- 🇮🇹 Anti-Friction Coating MOLYKOTE®
- 🇬🇧 MOLYKOTE® high-performance industrial lubricants
- 🇬🇧 Smart Lubrication for vehicle electrical systems
- 🇬🇧 Smart Lubrication for vehicle chassis & brake systems
- 🇬🇧 Smart Lubrication for vehicle powertrain systems
- 🇬🇧 Smart Lubrication for vehicle interior design
- 🇬🇧 Smart Lubrication for vehicle exterior design
- 🇬🇧 This is Molykote
- 🇬🇧 MOLYKOTE® P-1900 FM Paste Spray
- 🇬🇧 Hydrogen-ready lubricants from MOLYKOTE®
- 🇬🇧 MOLYKOTE® Lubricants for wind turbines
- 🇬🇧 MOLYKOTE® specialty lubricants for the oil & gas industry
- 🇬🇧 MOLYKOTE® Pastes for general lubrication, assembly & threaded connection applications
Industries
Discover the industries of reference for Molykote
Video
Subscribe to our YouTube channel
