Dowsil Adhesives

Mostra Nascondi Filtri

Showing 21–40 of 43 results

  • DOWSIL™ 736 Heat Resistant Sealant
    Read more Quick View

    DOWSIL™ 736 Heat Resistant Sealant
    • It does not sag and drip
    • Can be applied overhead or on side walls
    • Can be used in applications with continuous exposure at 260°C (500°F) and intermittent exposure at 315°C (600°F)
  • DOWSIL™ 738 Electrical Sealant
    Read more Quick View

    DOWSIL™ 738 Electrical Sealant
    • Not smooth
    • Polymerization at room temperature
    • High elongation for greater stress reduction
    • No mixing required
    • Polymerization at room temperature, no need for ovens
    • Faster inline machining with optional thermal acceleration
    • Improved reliability through reduced curing stresses
    • Automated or manual needle dispensing systems
  • DOWSIL™ 748 Non-Corrosive Sealant
    Read more Quick View

    DOWSIL™ 748 Non-Corrosive Sealant
    • Can be used in corrosion-sensitive electrical equipment and PCB systems without adverse effects
    • Easy to handle
    • UL Classified
    • Non-corrosive
    • Low odor
    • Cures at room temperature
  • DOWSIL™ 752 Adhesive Sealant
    Read more Quick View

    DOWSIL™ 752 Adhesive Sealant
    • Single-component adhesive/sealant
    • Cures at room temperature when exposed to air humidity
    • Acetoxy polymerization system
    • Pasty and non-sagging consistency
    • Easy to apply
    • Cures into a durable and flexible rubber
    • Good adhesion on many substrates
    • Stable and flexible from -50°C (-58°F) to 180°C (356°F)
  • DOWSIL™ 832 Multi-Surface Adhesive Sealant
    Read more Quick View

    DOWSIL™ 832 Multi-Surface Adhesive Sealant
    • 100% silicone
    • Superior adhesion to a wide variety of surfaces
    • Low odor
    • Neutral polymerization (alcohol)
    • Does not corrode metal or other sensitive materials
    • Forms a flexible and long-lasting seal
  • DOWSIL™ 93-006-1 RF Sealant & Kit
    Read more Quick View

    DOWSIL™ 93-006-1 RF Sealant & Kit
    • High viscosity
    • Lump-free
    • High performance
    • Adheres well to primed surfaces
  • DOWSIL™ AS 7096N Sealant Clear
    Read more Quick View

    DOWSIL™ AS 7096N Sealant Clear
    • Single-component adhesive/sealant
    • Cures at room temperature when exposed to air humidity
    • Alkoxyl polymerization system
    • Pasty and non-sagging consistency
    • Easy to apply
    • Excellent primerless adhesion to many substrates
    • Non-corrosive for metals
    • Stable and flexible from -50°C to +150°C
  • DOWSIL™ CC 2588
    Read more Quick View

    DOWSIL™ CC 2588
    • Medium viscosity
    • Abrasion-resistant elastoplastic surface
    • Solvent-based coating
    • High solid content
    • UV indicator for inspection
    • Room temperature vulcanization (RTV)
    • Good adhesion on rigid and flexible PCBs
  • DOWSIL™ CC 8030 UV
    Read more Quick View

    DOWSIL™ CC 8030 UV
    • Low viscosity, spray applicable
    • Fast UV cure with secondary moisture cure
    • Solvent-free
    • UV indicator for inspection
    • Good adhesion to PCB materials
    • Reduced oxygen inhibition
  • DOWSIL™ CC-3122 Conformal Coating
    Read more Quick View

    DOWSIL™ CC-3122 Conformal Coating
    • One-component silicone conformal coating
    • Translucent
    • Low viscosity
    • Moisture cure (RTV)
    • Solvent-free
    • Provides environmental resistance
    • Dielectric protection
    • Long-term reliability even in harsh environmental conditions
    • UL recognized and includes a UV indicator for coating inspection.
  • DOWSIL™ EA-2626 / Silastic™ Q3-3636
    Read more Quick View

    DOWSIL™ EA-2626 / Silastic™ Q3-3636
    • Two-component adhesive sealant
    • Rapid polymerization at room temperature
    • Neutral alkoxide polymerization
    • Pasty, non-self-levelling consistency
    • Good and durable adhesion
    • Excellent weather, UV and heat resistance up to 190°C
    • Rapid curing allows rapid handling of bonded components
    • Deep polymerization
  • DOWSIL™ EA-2626 Adhesive
    Read more Quick View

    DOWSIL™ EA-2626 Adhesive
    • Two-component adhesive sealant
    • Rapid polymerization at room temperature
    • Neutral alkoxide polymerization
    • Pasty, non-self-levelling consistency
    • Good and durable adhesion
    • Excellent weather, UV and heat resistance up to 190°C
    • Rapid curing allows rapid handling of bonded components
    • Deep polymerization
  • DOWSIL™ EA-3838 Fast Adhesive
    Read more Quick View

    DOWSIL™ EA-3838 Fast Adhesive
    • Fast and homogeneous deep polymerization
    • Early adhesion at room temperature
    • Pasty, non-self-levelling consistency
    • Rapid handling of bonded components
    • Fast assembly process
    • Durable adhesion to a wide variety of substrates
    • Excellent resistance to weathering and U.V. rays.
  • DOWSIL™ EA-6060 Adhesive
    Read more Quick View

    DOWSIL™ EA-6060 Adhesive
    • Two-part silicone adhesive
    • Non-sag
    • Fast low-temperature cure
    • Accelerated cure at moderate temperature (80 °C)
    • Rapid adhesion development.
    • The formulation includes a scavenger to reduce void formation and a UV indicator to facilitate inspection operations.
    • Maintains physical and electrical properties across a wide range of operating conditions.
    • Primerless adhesion
  • DOWSIL™ EC-8425
    Read more Quick View

    DOWSIL™ EC-8425
    • High electrical conductivity (silver-based filler)
    • Electromagnetic shielding (EMC) over a wide frequency range
    • High elongation for stress relief (>20%)
    • Non-slump adhesive (non-flowable)
    • UV traceability for inspection
    • Good adhesion on various substrates
    • Solvent-free formulation
  • DOWSIL™ EG-1200 Gel
    Read more Quick View

    DOWSIL™ EG-1200 Gel
    • Gel is a two-component addition-cure silicone gel
    • Clear and flowable,
    • Designed for optically clear potting and coupling applications in displays and LED lighting systems.
    • High transparency
    • Reduced yellowing
    • High surface adhesion
    • Good stress absorption capacity
    • Provides mechanical protection, electrical insulation and long-term reliability.
    • Can cure at room temperature or with thermal acceleration.
  • DOWSIL™ FIRESTOP 700 Silicone Sealant
    Read more Quick View

    DOWSIL™ FIRESTOP 700 Silicone Sealant
    • Meets BS 476 Part 22 standard
    • Excellent primerless adhesion on most substrates
    • porous and non-porous buildings
    • It does not drip
    • Joint movement capacity ±50%
    • Neutral curing system
    • Halogen-free
    • Complies with ISO 11600-F&G-25LM Standard
    • A fire resistance value of up to 4 hours can be obtained
    • Extensively tested on many European specifications
    • Out of footprint in 1.5 hours
    • Excellent weathering characteristics, including resistance to ozone, UV radiation and extreme temperatures
    • Long service life
    • CE marked as fire resistant according to ETAG 026
  • DOWSIL™ MS-1002 Moldable Silicone
    Read more Quick View

    DOWSIL™ MS-1002 Moldable Silicone
    • Two-component 1:1 optical silicone
    • Molding resin for optical applications
    • High light transmittance
    • Low chromatic dispersion
    • UV and heat resistant
    • High surface detail replication
    • High Shore A
    • Fast heat curing
  • DOWSIL™ Q3-1566 Heat Resistant Adhesive/ Sealant
    Read more Quick View

    DOWSIL™ Q3-1566 Heat Resistant Adhesive/ Sealant
    • Cures at room temperature when exposed to air humidity
    • Acetoxy polymerization system
    • Pasty and non-sagging consistency
    • Easy to apply
    • Good adhesion on many substrates
  • DOWSIL™ Q3-3526 Base and Catalyst
    Read more Quick View

    DOWSIL™ Q3-3526 Base and Catalyst
    • Rapid handling of bonded components: rapidly develops adhesive strength at room temperature, enabling rapid handling of components.
    • Adheres to suitably prepared polypropylene.
    • Two-component system with 10:1 mixture ratio by weight. Non-corrosive and low-odor curing.
    • It contains no solvents.
    • The non-lumpy nature of the mixture allows the extruded bead to remain in place without flowing.
    • Excellent resistance to weathering, UV rays and heat up to 190°C.
    • Available in two color versions: Gray (RAL 7038) and Black (RAL 7016).