CRC Industry MRO
Showing all 14 results
Filtri
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Low-viscosity precision oil
- Multipurpose lubricant
- Displaces and seals out water and moisture
- Loosens parts seized by dirt, corrosion, or dried grease
- High penetration capacity
- Protects metals and alloys
- Lubricates without leaving sticky residues
- Prevents fingerprints on polished metal surfaces
- Safe on all metal surfaces
- Compatible with most rubbers, plastics, and coatings (preliminary testing recommended)
- 360° spray valve
- High-purity CO₂ propellant (95% active content)
- Professional technical spray
-
- High lubricating capacity
- Good penetration capability
- Penetrating action on seized parts
- Strong general corrosion protection
- Displaces and seals out water and moisture
- Light cleaning action on metal surfaces
- Multi-purpose: lubricates, penetrates, protects, and cleans
- Safe on all metal surfaces, non-staining
- Compatible with most rubbers, plastics, and coatings
- Readily biodegradable formula according to OECD 301B (>60%)
- Bio-based carbon content: 63%
- Part of the Green Force® biodegradable range
- 2-in-1 spray system (Clever-Straw)
- 360° spray valve, can be used upside down
- High-purity CO₂ propellant
- 95% active product content
- Professional technical spray
-
- Multi-purpose marine lubricant
- Corrosion inhibitor
- Paraffinic oil base with multiple organic inhibitor system
- Displaces and seals moisture from metal surfaces
- Forms a continuous protective barrier against water and oxygen
- Thin, almost invisible oil film
- High penetration capacity into pores and crevices
- Lubricates without leaving sticky residues
- Releases rusted parts
- Prevents electrical failures due to moisture
- Compatible with most paints, plastics and rubbers
- Silicone-free
- Resistant to water and marine and saline environments
- 360° spray valve
- Non-flammable CO₂ propellant
- Active content: 97%
- Professional technical spray
-
- Heavy-duty and HT ceramic paste
- High-temperature resistant
- Anti-seize paste
- Protects against corrosion and fretting corrosion
- Excellent separation properties
- Resistant to emulsions
- Applicable in heavy-duty working conditions
- Non-volatile
- Wide temperature range
- Suitable for aluminum and stainless steel components
- Professional technical spray
-
- High-performance lubricant for drive and conveyor chains
- Foaming formula with high adhesion
- Long-lasting lubrication
- Excellent penetration and non-drip
- Resistant to water washout
- Effectively protects against corrosion
- Reduces friction and wear
- Good carrying capacity
- O-ring compatible
- Solvent-free
- Virtually colorless and odorless
- Suitable for incidental food contact
- Professional technical spray
-
- Electrical contact cleaning oil
- Removes corrosion and oxidation (oxides, sulfates, sulfides, carbonates)
- Dissolves grease, oil, and resinous contamination
- Rapid evaporation
- Non-corrosive
- Contains corrosion inhibitor
- Provides long-lasting lubrication
- Protects contacts after cleaning
- Safe on metal surfaces (non-staining)
- Safe on most rubbers, plastics, and coatings
- (preliminary testing recommended on sensitive materials)
- 360° spray valve (can be used upside down)
- High-purity CO₂ propellant (95% active content)
- Do not use on energized equipment
- Professional technical spray
-
- Precision cleaner for electrical and electronic contacts
- Removes dirt, residues and contaminants from contacts
- Leaves no residue after application
- Fast drying
- Suitable for cleaning electronic boards
- Specific for electrical and electronic equipment
- Non-corrosive
- Developed for components that do not tolerate aqueous cleaners
- Do not use on energized equipment
- Professional technical spray
-
- PTFE-based dry lubricant
- Dry, clean, and non-sticky lubricating film
- Does not attract dust or dirt
- Significantly reduces the coefficient of friction
- Excellent non-stick and release properties
- Oil-free and grease-free formulation
- Non-staining and does not form sludge
- Adheres to metal, plastic, rubber, wood, and glass
- Stable over a wide temperature range
- Resistant to water and chemicals
- Ideal for low speeds and light loads
- Fast drying (approx. 15 minutes)
- Professional technical spray
-
- High-performance industrial degreaser
- Fast-acting with quick drying
- Removes grease, oils, lubricants, tar and adhesives
- Leaves no residue
- Rapidly penetrates and removes dirt and moisture
- Non-corrosive and non-staining on metals
- Acetone-free formula
- Free from chlorinated solvents
- Compatible with most plastics
- Improves overall performance of treated surfaces
- Readily biodegradable (OECD 301B: 62%)
- 360° spray valve (can be used upside down)
- High-purity CO₂ propellant (active content >95%)
- Suitable for industrial use, including food processing (NSF)
- Professional technical spray
-
- Removes self-adhesive paper labels in 2-3 minutes
- Leaves no residue after evaporation
- Non-corrosive
- Non-conductive
- Does not scratch surfaces
- Reduced odor
- Can be used with precision straw
- 360° application (even upside down)
- Professional technical spray
-
- Light lubricating oil for universal use
- Formulated for frequent start-up situations
- Contains PTFE for friction reduction
- Long-lasting protection against wear and friction
- Effectively protects against corrosion
- Reliable lubrication even in repeated start/stop cycles
- Reduces seizing and deterioration of metal surfaces
- Professional technical spray
-
- Heavy-duty indoor corrosion inhibitor
- Up to 2 years indoor corrosion protection
- Thin, penetrating, and non-drying film
- High coverage on flat surfaces and sharp edges
- Long-term lubricant for parts subject to continuous wear
- Displaces moisture
- Suitable for all metal alloys, including copper and brass
- Easily removable with solvents, alkaline cleaners, or steam
- Facilitates easy machinery restart after storage
- Ideal as a final protective film for completed assemblies
- 360° spray valve, usable even upside down
- Non-flammable CO₂ propellant
- 95% active content
-
- Special compound for metal working
- High adhesion between tool and workpiece
- Extreme pressure (EP) resistant
- Forms a tough, resistant film during machining
- Reduces tool wear
- Improves surface finish
- Dissipates heat during cutting
- Extends tool life
- Reduces production waste
- Suitable for stainless steel and high-strength steel
- Perfect for turning, drilling, reaming, tapping and threading operations.
- Professional technical spray
-
- High-performance non-chlorinated tapping lubricant
- Blend of highly refined base oils and synthetic additives
- High lubricating capacity with excellent cooling properties
- Anti-welding properties
- Reduces friction and wear, increasing tool life
- Improves surface finish
- Reduces operating temperatures
- Enables higher operating speeds
- Chlorine-free additive system
- Free of active sulfur
- Aerosol formulation with non-flammable propellant system
- 360° spray with extension tube for precise application
- Professional technical spray
