Transparent
Showing 21–40 of 120 results
Filtri
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Grip time 30 seconds
- High adhesion strength: > 6 MPa after 5 min
- Open time 25 minutes
- Filling gaps between substrates up to 5 mm
- Excellent adhesion to a wide variety of substrates
- Translucent when cross-linked
- Resistant to temperature and humidity
- Gel consistency for precise dosing
-
- High adhesion strength
- Long time open
- Low blooming
- Less brittle than conventional instant adhesives
- They glue a wide range of materials, including polystyrene
-
- Multi-purpose marine lubricant
- Corrosion inhibitor
- Paraffinic oil base with multiple organic inhibitor system
- Displaces and seals moisture from metal surfaces
- Forms a continuous protective barrier against water and oxygen
- Thin, almost invisible oil film
- High penetration capacity into pores and crevices
- Lubricates without leaving sticky residues
- Releases rusted parts
- Prevents electrical failures due to moisture
- Compatible with most paints, plastics and rubbers
- Silicone-free
- Resistant to water and marine and saline environments
- 360° spray valve
- Non-flammable CO₂ propellant
- Active content: 97%
- Professional technical spray
-
- Precision cleaner for electrical and electronic contacts
- Removes dirt, residues and contaminants from contacts
- Leaves no residue after application
- Fast drying
- Suitable for cleaning electronic boards
- Specific for electrical and electronic equipment
- Non-corrosive
- Developed for components that do not tolerate aqueous cleaners
- Do not use on energized equipment
- Professional technical spray
-
- High-performance release agent for direct food contact
- Multi-purpose lubricant for food processing equipment
- Stable and long-lasting lubrication of moving parts
- Non-stick properties to prevent food adhesion to surfaces
- Protection against corrosion
- Non-toxic and odorless
- Safe for use in food production areas
- Silicone-free
- Halal certified
- Professional technical spray
-
- High-performance, long-lasting synthetic lubricant for ejector pins
- High lubricating power even under extreme conditions
- Suitable for high temperatures, high pressures, and high linear speeds
- Eliminates seizing issues for ejector pins and slides
- Prevents grease migration and contamination on the cosmetic side of molded parts
- Promotes gas sealing at the ejector level
- Does not carbonize and leaves no deposits or black marks on finished parts
- Good penetration capability
- Compatible with steel/steel, steel/bronze, and steel/aluminum pairings
- Professional technical spray
-
- High-performance industrial degreaser
- Fast-acting with quick drying
- Removes grease, oils, lubricants, tar and adhesives
- Leaves no residue
- Rapidly penetrates and removes dirt and moisture
- Non-corrosive and non-staining on metals
- Acetone-free formula
- Free from chlorinated solvents
- Compatible with most plastics
- Improves overall performance of treated surfaces
- Readily biodegradable (OECD 301B: 62%)
- 360° spray valve (can be used upside down)
- High-purity CO₂ propellant (active content >95%)
- Suitable for industrial use, including food processing (NSF)
- Professional technical spray
-
- Removes self-adhesive paper labels in 2-3 minutes
- Leaves no residue after evaporation
- Non-corrosive
- Non-conductive
- Does not scratch surfaces
- Reduced odor
- Can be used with precision straw
- 360° application (even upside down)
- Professional technical spray
-
- High-efficiency cleaner for industrial moulds
- Removes grease, oil, wax, and release agent residues
- Removes carbonized polymer residues
- Fast and effective action
- Fast evaporation without leaving residue
- No rinsing required
- Compatible with metal surfaces
- Ready to use
- Silicone-free
- Professional technical spray
-
- Long-term transparent corrosion inhibitor
- Protection for moulds and tools during storage and transport
- Forms a high-coverage waxy protective film
- High coverage capacity even with a thin layer
- Repels moisture from metal surfaces
- Effective protection against water and oxygen
- Silicone-free
- Chemically inert on ferrous and non-ferrous metals
- Non-drip, stable even on vertical surfaces
- Easily removable before returning to service
- Professional technical spray
-
- High penetrating power
- Fast action on seized mechanisms
- Loosens rusted nuts, bolts, and components
- Disperses rust, oxides, and residues
- Reduces component wear
- Facilitates disassembly
- Compatible with metals, plastics, and rubbers (preliminary testing recommended)
- Silicone-free
- NSF H1 registered for use in food processing environments
- Nut-derivative free
- Professional technical spray
-
-
Effectively removes fondants and sugar-based residues
-
Quickly dissolves sugars and derivatives
-
Rapidly penetrates deposits
-
Leaves a light lubricating film that inhibits re-adhesion
-
Helps prevent sugar build-up on fasteners
-
Contains no vegetable oils or nut derivatives
-
Suitable for maintenance on processing and packaging lines
-
Do not use on energized equipment
-
Professional technical spray
-
-
- Cures to an elastoplastic surface
- Resilient and abrasion resistant
- Single-component solvent-based resin coating
- Polymerization at room temperature
- It can speed up in-line processing
- UV indicator enables automatic inspection
- Allows use with many low-solids lead-free solder
-
- Cures to an elastoplastic surface
- Resilient and abrasion resistant
- Solvent-based resin coating
- Polymerization at room temperature
- The optional thermal acceleration (after solvent wilting)
- UV indicator enables automated inspection
- Allows use with many low-solids lead-free solder
- Reduced VOC content
- Emission recovery can be simplified for VOCs in some U.S. states
-
- Cures to a robust surface
- Resilient and abrasion resistant
- Solvent-based resin coating
- Polymerization at room temperature
- Possibility of acceleration after solvent spillage
- UV indicator for inspection
- Allows use with many low-solids lead-free solder
- Low viscosity improves flow and
- fill tight spaces and gaps
-
- Medium viscosity
- Low VOC content
- Abrasion resistance
- Good dielectric properties
- Good adhesion to many substrates
- Polymerization at room temperature
- Stable and flexible over a wide temperature range
-
- Single-component silicone conformal coating
- Transparent
- Thermal polymerization
- Designed for the protection of rigid and flexible printed circuit boards.
- Low viscosity
- Without added solvents
- Cures into a soft, low-stress elastomer, reducing stress on electronic components.
- Incorporates a UV indicator to facilitate automated inspection
- UL, IPC and MIL certified.
-
- Improves adhesion of silicone sealants to many substrates
- Provides more uniform and stronger bonds
- Complies with South Coast and Bay standards
- South Coast and Bay Area Air Management District.
- Primer for architectural sealants
- Low VOC at 76 g/l
- Formulated for low toxicity
- The OS solvent used does not deplete the ozone layer. OS = Ozone Safe
- The primer is suitable for Waterproofing and structural applications for glazing applications
-
- Single-component, does not require mixing
- Good fluidity
- After dispensing, it is capable of flowing, filling or self-leveling
- Faster inline machining with optional thermal acceleration
- No solvent added
- Allows use with many low-solids lead-free solder
- Soft coating improves reliability against stresses
- UV indicator enables automatic inspection
-
- No solvent added
- Polymerization at room temperature
- Slight thermal acceleration can speed up in-line processing
- Good adhesion to many substrates
- Allows use with many low-solids lead-free solder
- Soft coating improves reliability against stresses
