Products
Showing 361–380 of 577 results
Filtri
Tipo di prodotto
- 1 Anaerobic activator
- 9 Anaerobic adhesive
- 23 Anti friction coating
- 8 Cleaner
- 2 Cleaners
- 5 Compound
- 1 Conductive paints
- 19 Conformal coating
- 7 Dispersions
- 49 Elastomeric adhesive
- 5 Electrically conductive adhesives
- 16 Electronics adhesive
- 2 Gap filler
- 8 Gel
- 93 Greases
- 10 Heat-conductive adhesive
- 3 Hot-Melt Stickers
- 7 Instant adhesive
- 72 Oils
- 20 Pastes
- 13 Primer
- 31 Resins and encapsulants
- 3 Solid lubricant
- 2 special
- 40 Structural adhesive
- 6 Thermal conductive paste
Marchio
Tecnologia
Applicazioni
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Applicable at low temperature
- High initial grip
- Excellent performance on compact paper and paperboard
- Ideal for food and frozen products
-
- Compatible with paints
- Simple processing
- High elasticity, good mechanical strength
- Long time open
- Free of solvents, isocyanates and silicones
- Odorless
- Chemically neutral polymerization
- Non-corrosive on surfaces
- Absorbs vibrations
- Sandable and paintable
- Very wide range of adhesion
- Excellent sealing properties
-
- Short-term resistant up to + 240°C
- High ultimate strength
- Simple processing
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Adjustable
- Excellent sealing properties
- Non-corrosive on surfaces
- Corrosion protection
- Absorbs shock
-
- High ultimate strength
- Simple processing
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Chemically neutral polymerization
- Compatible with paints
- Resistant up to +200°C for powder and thermal coatings
- Adjustable
- Excellent sealing properties
- Non-corrosive on surfaces
- Vibration absorption
-
- Very high initial adhesion
- Free of solvents, isocyanates and silicones
- Adjustable
- Complete and rapid curing
- Very high mechanical strength
- Excellent sealing properties
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Chemically neutral polymerization
- Short-term resistant up to +200°C for powders and thermal coatings.
- Thermal
- Non-corrosive on surfaces
- Shock and vibration resistant (absorbs shock)
- Resists thermal expansion and material tension
-
- Sprayable
- Long time open
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Resistant up to +200°C for powder and thermal coatings
- Adjustable
- It fills in the gaps and cracks
- Permanently elastic
- Excellent sealing properties
- Non-corrosive on surfaces
- Vibration absorption
-
- Simple processing
- Easy finishing and cleaning
- Free of solvents, isocyanates and silicones
- Wide spectrum of adhesion
- Odorless
- Compatible with paints
- Excellent sealing properties
-
- Thermal conductivity of 1.4 W/(m-K)
- Mixing ratio 1:1
- Processing time: 45 minutes
- Cure time: 24 hours at room temperature or 1 hour at 65 °C (149 °F)
- Provides strong electrical insulation
- High mechanical strength
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Thermal conductivity of 0.8 W/(m-K)
- Mixing ratio 1:1
- Fire retardant - UL 94V-0 registered
- Processing time: 5 minutes
- Laying time: 15 minutes
- Provides strong electrical insulation
- Low CTE before Tg
- High tensile and compressive strength
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons"
-
- Extreme electrical conductivity
- Convenient 1-to-1 mixing ratio
- Processing time: 20 minutes
- Cure time: 6 hours at room temperature or 10 minutes at 65 °C (149 °F)
- Creates strong permanent electrical connections
- Polymerization at room temperature
- Without SVHC
- Excellent adhesion to many substratesStorage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Low outgassing approved by NASA
- Extreme electrical conductivity
- Convenient 1-to-1 mixing ratio
- Working time: 4 hours
- Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
- Creates strong permanent electrical connections
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- High electrical conductivity
- Convenient 1-to-1 mixing ratio
- Processing time: 20 minutes
- Cure time: 6 hours at room temperature or 10 minutes at 65 °C (149 °F)
- Creates strong permanent electrical connections
- Polymerization at room temperature
- Without SVHC
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Low outgassing approved by NASA
- High electrical conductivity
- Convenient 1-to-1 mixing ratio
- Working time: 4 hours
- Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
- Creates strong permanent electrical connections
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Provides >52 dB RFI shielding at frequencies <1 MHz
- Excellent adhesion to plastics
- Strong corrosion resistance
- Gentle solvent system, safe on polystyrenes
- HAP-free: does not contain toluene or xylene
-
- UL Recognized (File No. E202609)
- Provides effective EMI/RFI shielding over a wide range of frequencies
- Strong corrosion resistance
- Gentle and safe solvent system on polystyrenes
- HAP free-does not contain toluene, xylene, or MEK
- Available in aerosol format
-
- Good conductivity
- Provides good RFI shielding
- Extreme durability and grip
- Strong resistance to solvents
- Excellent corrosion and salt spray resistance
-
- Provides effective EMF shielding
- Ideal for wood and drywall
- Ideal for shielding the cavities of electric guitars
- Non-flammable and without harmful odors
- Low VOC content
-
- Provides superior EMI shielding
- Excellent adhesion to plastics
- Minimum height of thin layer
- Strong corrosion resistance
- Gentle solvent system, safe on polystyrenes
- HAP-free: does not contain toluene, xylene or MEK
-
- Upper EMI shielding
- Polymerization at room temperature and high
- Excellent chemical and corrosion resistance
- Stable under extreme environmental conditions (100 hours at 150˚C, 100 hours at 85˚C/85% RH)
- Resists wave soldering
- Without MEK and HAPS
-
- Provides excellent EMI/RFI shielding over a wide frequency range
- Non-flammable and without harmful odors
- Shipping as non-DG by air
- Low VOC content
