Instant adhesive
Showing all 11 results
Filtri
Tipo di prodotto
- 7 Instant adhesive
Marchio
Tecnologia
Applicazioni
-
- Hardens in 5-10 minutes
- Elongation > 200 %
- Absorbs shock and vibration
- High resistance to peeling
- Bonding a wide range of materials including glass
- Translucent, low efflorescence
- Gel consistency for precise application
- Non-drip for vertical applications
-
- Polymerization: instant and light curing (dual cure)
- Polymerized with visible and UV-LED light
- Long open time without activation
- Curing surfaces dry to the touch and free of stickiness
- On-demand polymerization of excess material released from splice lines
- Bonding, filling, reconstruction and coating
- Low odor and low bloom
- Highly flexible and elastic (Light Lock 30X)
- Adhesion to multiple substrates
- Available in a range of viscosities
-
- Instant and light-curing polymerization (dual cure)
- Fixing time in 60 s (without exposure to light)
- Polymerizable with visible light and UV-LED <5 sec
- Long opening time without activation
- Dry to the touch, surface curing without adhesiveness
- On-demand polymerization of excess material released from weld seams
- Bonding, filling, reconstruction and coating
- Low odor and low effervescence
-
- Very low viscosity
- Excellent wettability on low surface energy substrates
- Improves adhesion to difficult-to-bond substrates
- Specially formulated for the adhesion of polyolefins
- Suitable for use with other cyanoacrylates
- Dries in seconds
- Increases adhesion strength
-
- Fixing time in 60 seconds
- Hardens in 5-10 minutes
- Instant adhesion with high bond strength
- Low volumetric contraction: 4.3 percent
- Fills empty spaces of large volumes
- Bonding a wide range of materials
- Workable, sandable and paintable once cured
- Impact resistant
- The gel allows for precise application
- Non-drip for vertical applications
-
- Grip time 30 seconds
- High adhesion strength: > 6 MPa after 5 min
- Open time 25 minutes
- Filling gaps between substrates up to 5 mm
- Excellent adhesion to a wide variety of substrates
- Translucent when cross-linked
- Resistant to temperature and humidity
- Gel consistency for precise dosing
-
- High adhesion strength
- Long time open
- Low blooming
- Less brittle than conventional instant adhesives
- They glue a wide range of materials, including polystyrene
-
- Ultra-fast curing
- Intermediate viscosity: also suitable for gaps up to 0.25 mm
- High mechanical strength: up to 22 N/mm² on steel
- Biocompatibility
- Suitable for automatic dispensing (automated dispensing)
- Withstands sterilization and short temperature spikes (e.g., painting, welding)
- 100% reactive, solvent-free
-
- Fast curing: setting in 5-35 seconds depending on substrate
- Black color: ideal for dark or visually exposed surfaces
- High gap fill up to 0.5 mm
- High mechanical strength: up to 23 N/mm² on steel
- Excellent adhesion on metals, plastics and rubbers
- 100% reactive, solvent-free
- Does not require heat or mixing
-
- Flexible adhesive with high elongation
- Excellent resistance to shock and vibration
- Thixotropic: easy to apply even on vertical surfaces
- Suitable for dissimilar materials subject to thermal shock
- Rapid polymerization at room temperature
- Can also be used on silicone with POP primer
-
- Fast-curing single-component cyanoacrylate adhesive
- Thermal resistance up to 200°C (392°F)
- High adhesive strength
- Low viscosity
- High temperature stress tolerance
- Retention of mechanical strength after thermal aging
