Showing 241–260 of 262 results
Filtri
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Low outgassing approved by NASA
- Extreme electrical conductivity
- Convenient 1-to-1 mixing ratio
- Working time: 4 hours
- Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
- Creates strong permanent electrical connections
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- High electrical conductivity
- Convenient 1-to-1 mixing ratio
- Processing time: 20 minutes
- Cure time: 6 hours at room temperature or 10 minutes at 65 °C (149 °F)
- Creates strong permanent electrical connections
- Polymerization at room temperature
- Without SVHC
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Low outgassing approved by NASA
- High electrical conductivity
- Convenient 1-to-1 mixing ratio
- Working time: 4 hours
- Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
- Creates strong permanent electrical connections
- Excellent adhesion to many substrates
- Storage at room temperature
- Long shelf life
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Good conductivity
- Provides good RFI shielding
- Extreme durability and grip
- Strong resistance to solvents
- Excellent corrosion and salt spray resistance
-
- Upper EMI shielding
- Polymerization at room temperature and high
- Excellent chemical and corrosion resistance
- Stable under extreme environmental conditions (100 hours at 150˚C, 100 hours at 85˚C/85% RH)
- Resists wave soldering
- Without MEK and HAPS
-
- High electrical conductivity
- Creates strong permanent electrical connections
- No mixing is required
- Cure time: 1 hour at 90 °C (194 °F) or 7 minutes at 150 °C (302 °F)
- Storage at room temperature (≤ 22 °C)
- Suitable for automated distribution
-
- High thermal conductivity
- No mixing is required before use
- Provides strong electrical insulation
- Low curing temperature (<100 °C)
- Storage at room temperature (≤ 22 °C)
- Binds well to a wide variety of substances
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
- Quick and easy spray application
- Low coefficient of friction
- Applicable to food industry applications
- Absence of polytetrafluoroethylene (PTFE) or intentional per- and polyfluoroalkyl substances (PFAS)
- Good resistance to water and corrosion
- Good carrying capacity
- White appearance
- Good protection against fretting
- High load capacity
- High-temperature performance
- High resistance to wear and tear
- Release properties
- Wide temperature range
-
- Ultra-fast curing
- Intermediate viscosity: also suitable for gaps up to 0.25 mm
- High mechanical strength: up to 22 N/mm² on steel
- Biocompatibility
- Suitable for automatic dispensing (automated dispensing)
- Withstands sterilization and short temperature spikes (e.g., painting, welding)
- 100% reactive, solvent-free
-
- Fast curing: setting in 5-35 seconds depending on substrate
- Black color: ideal for dark or visually exposed surfaces
- High gap fill up to 0.5 mm
- High mechanical strength: up to 23 N/mm² on steel
- Excellent adhesion on metals, plastics and rubbers
- 100% reactive, solvent-free
- Does not require heat or mixing
-
- Flexible adhesive with high elongation
- Excellent resistance to shock and vibration
- Thixotropic: easy to apply even on vertical surfaces
- Suitable for dissimilar materials subject to thermal shock
- Rapid polymerization at room temperature
- Can also be used on silicone with POP primer
-
- Fast-curing single-component cyanoacrylate adhesive
- Thermal resistance up to 200°C (392°F)
- High adhesive strength
- Low viscosity
- High temperature stress tolerance
- Retention of mechanical strength after thermal aging
-
- Dual polymerization: anaerobic + UV
- UV fluorescence for inspection
- Also applicable post-assembly
- High chemical resistance
- Ideal for applications on ammunition
- Fast adhesion and good environmental sealing
- Low viscosity for capillary penetration
-
- Simple one-component system
- High viscosity for maximum game filling
- High shear strength
- Thixotropic: not runny
- Replaces interference couplings
- Resistant to environmental agents and temperature
- Prevents wear, play and corrosion
-
- Excellent adhesion on plastics and difficult substrates
- High internal cohesion
- Pressure-sensitive formulation
- Specific for automotive applications and interior coatings
-
- Low odor formulation
- High heat resistance
- Specific for automotive applications
-
- Excellent adhesion on PP and PET
- High thermal resistance
- Good behavior even at low temperatures
- Long open time
-
- Addition-curing two-component silicone elastomer
- Easy-to-use and easy-to-manage 1:1 mixing ratio
- High tear resistance
- Low compression set
- Good adhesion to many substrates
- Hardness suitable for sealing applications with high clamping loads
- The non-sagging nature allows for accurate and uniform seal beads of precise dimensions as defined by the robot application parameters.
- Does not require solvents, CFCs or other environmentally harmful materials for processing
-
- Low wax and low pour point
- High dielectric strength and excellent insulating properties
- Ideal for hermetically sealed compressors with exposed electrical components
- Excellent chemical stability, does not react with refrigerants or metals
- High thermal stability
- Suitable for CFC and HCFC refrigerants (R-11, R-12, R-13, R-113, R-114, R-115, R-21, R-22, R-123, R-124, R-141b, R-142b, R-502)
- Can be used with ammonia (R-717), isobutane (R-600a) and propane (R-290)
- Ideal for systems with evaporator temperatures as low as -42ºC / -44ºF"
-
- High miscibility with HFC refrigerants
- Efficient oil return from compressor to evaporator
- Prevents excessive dilution, reducing friction and protecting components
- High thermal stability
- Compatible with HFC refrigerants (R-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A, and R-507A)
- Can be used on piston, screw, centrifugal and scroll compressors in multiple industries
- Ideal for refrigeration, air conditioning and heat pumps with chlorine-free and environmentally friendly refrigerants
