Showing 281–292 of 292 results
Filtri
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Excellent adhesion on PP and PET
- High thermal resistance
- Good behavior even at low temperatures
- Long open time
-
- Two-component Fluoro Liquid Silicone Rubber (F-LSR) for liquid injection molding
- High resistance to fuels, oils and solvents
- Chemical and fluid resistance
- Fast-curing platinum technology, without by-products
- Curing over a wide temperature range
- High resistance to high temperatures
-
- Addition-curing two-component silicone elastomer
- Easy-to-use and easy-to-manage 1:1 mixing ratio
- High tear resistance
- Low compression set
- Good adhesion to many substrates
- Hardness suitable for sealing applications with high clamping loads
- The non-sagging nature allows for accurate and uniform seal beads of precise dimensions as defined by the robot application parameters.
- Does not require solvents, CFCs or other environmentally harmful materials for processing
-
- RTV silicone rubber for moulds, encapsulation and potting
- High mechanical strength
- High Shore hardness
- Very low shrinkage and good dimensional stability
- Good tear propagation resistance
- Suitable for high-temperature casting
- Room temperature curing within 24 hours
- Heat-accelerated curing
- Long mold life
- Highly detailed reproduction
- Simplified handling
-
- RTV silicone rubber for molds, encapsulation and potting
- High mechanical strength
- High Shore hardness
- Very low shrinkage and good dimensional stability
- Good tear propagation resistance
- Suitable for high-temperature casting
- Room temperature curing within 24 hours
- Heat-accelerated curing
- Long mold life
- Highly detailed reproduction
- Simplified handling
-
- Two-component addition-cure RTV silicone
- High mechanical strength
- High tear resistance
- High elongation
- Minimal shrinkage (0–0.1%)
- Long pot life
- Cures at room temperature in 24 hours
- Heat-accelerated cure
- Acceptable for food contact
-
- Low wax and low pour point
- High dielectric strength and excellent insulating properties
- Ideal for hermetically sealed compressors with exposed electrical components
- Excellent chemical stability, does not react with refrigerants or metals
- High thermal stability
- Suitable for CFC and HCFC refrigerants (R-11, R-12, R-13, R-113, R-114, R-115, R-21, R-22, R-123, R-124, R-141b, R-142b, R-502)
- Can be used with ammonia (R-717), isobutane (R-600a) and propane (R-290)
- Ideal for systems with evaporator temperatures as low as -42ºC / -44ºF"
-
- High miscibility with HFC refrigerants
- Efficient oil return from compressor to evaporator
- Prevents excessive dilution, reducing friction and protecting components
- High thermal stability
- Compatible with HFC refrigerants (R-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A, and R-507A)
- Can be used on piston, screw, centrifugal and scroll compressors in multiple industries
- Ideal for refrigeration, air conditioning and heat pumps with chlorine-free and environmentally friendly refrigerants
-
- Two-component polyurethane system
- Suitable for industrial applications
- Liquid formulation
-
- Two-component polyurethane system
- Elastic structural adhesive
- Good adhesion on various substrates
-
- Two-component polyurethane system
- Non-sag paste consistency
- Can be used as adhesive, sealant or caulking compound
- Mixing ratio 1:1 by volume
- Good environmental stability to UV and humidity
-
- Self-levelling liquid, suitable for spraying or dipping
- Excellent release properties
- Temperature stability up to 500°F (260°C), intermittent use up to 572°F (300°C)
- Good adhesion without primer to a variety of metals
