White
Showing 21–40 of 130 results
Filtri
Tipo di prodotto
- 1 Anti friction coating
- 2 Dispersions
- 22 Elastomeric adhesive
- 5 Electronics adhesive
- 45 Greases
- 6 Heat-conductive adhesive
- 5 Pastes
- 1 Primer
- 2 special
- 1 Structural adhesive
- 4 Thermal conductive paste
Marchio
Tecnologia
Applicazioni
-
- Excellent UV resistance
- Very effective protection against wear and very high resistance to mechanical loadsGood behavior at low temperatures
- Excellent anti-corrosion properties
- Ensures high-level lubrication of lifting machinery, regardless of the load
-
- Mixture of pharmaceutical-grade colorless oils and synthetic additives
- Ensures perfect lubrication of parts
- Harmless to humans and animals
- Total neutrality in terms of taste and smell
- Suitable for use at high temperatures
- Excellent cut and heat resistance
- Strong adhesion to moving parts for improved lubrication and reduced fuel consumption
- Reduced consumption
- Great resistance to water, steam and corrosion
- Excellent pumping capacity allowing its use in automatic greasing systems
-
- Not smooth
- Moderate thermal conductivity
- Does not require ovens or curing
- Heat flow away from circuit components can increase reliability
-
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Excellent adhesion to many substrates
- Stable and flexible from -40°C (-40°F) to 180°C (356°F)
-
- Provides instant green force
- Easy-to-use one-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Excellent adhesion to a wide range of substrates such as glass, metals and plastics
- Pasty and non-sticky consistency
- Cures into a durable and flexible rubber
- Stable and flexible from -50°C to +150°C
- UL 94 HB
- Rapid resistance formation promotes increased productivity due to rapid handling of bonded units
- Saves time because no buffer is needed for increasing resistance
-
- One-component adhesive sealant
- Cures at room temperature when exposed to moisture in the air
- Alkoxy polymerization system
- Pasty consistency, does not bag
- Easy to apply
- Low modulus for high movement capacity
- Good adhesion on many substrates
- Stable and flexible from -50°C (-58°F) to +180°C (+356°F)
-
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Fluid and self-leveling
- Easy to apply
- Excellent primerless adhesion to many substrates
- Stable and flexible from -50°C to +180°C
- Non-corrosive to metals
- Low odor
- Primerless adhesion to mixed substrates
-
- One-component fluorosilicone sealant adhesive.
- It cures at room temperature when
- exposed to moisture in the air
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Good adhesion to many substrates
- Stable and flexible from -65°C (-85°F) to 260°C (500°F)
- Retains its properties when exposed to fuels, oils and solvents
-
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Good adhesion to many substrates
- Stable and flexible from -60°C to +180°C (-76°F to +356°F), with short peaks up to +205°C (401°F)
- Black version: stable and flexible from -60°C to +205°C (-76°F to +401°F), with short peaks up to +230°C (446°F)
- Excellent dielectric properties
-
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Fluid and self-leveling
- Easy to apply
- Cures into a durable and flexible rubber
- Rapid no-grip time
- Good adhesion to many substrates
- Stable and flexible from -65°C (-85°F) to +180°C (+356°F)
- Excellent dielectric properties
-
- Not smooth
- Polymerization at room temperature
- High elongation for greater stress reduction
- No mixing required
- Polymerization at room temperature, no need for ovens
- Faster inline machining with optional thermal acceleration
- Improved reliability through reduced curing stresses
- Automated or manual needle dispensing systems
-
- Cures at room temperature
- Pasty consistency
- It does not drip
- Easy to apply
- High elongation
- Stable and flexible over a wide temperature range
-
- Can be used in corrosion-sensitive electrical equipment and PCB systems without adverse effects
- Easy to handle
- UL Classified
- Non-corrosive
- Low odor
- Cures at room temperature
-
- 100% silicone
- Superior adhesion to a wide variety of surfaces
- Low odor
- Neutral polymerization (alcohol)
- Does not corrode metal or other sensitive materials
- Forms a flexible and long-lasting seal
-
- Two-component adhesive sealant
- Rapid polymerization at room temperature
- Neutral alkoxide polymerization
- Pasty, non-self-levelling consistency
- Good and durable adhesion
- Excellent weather, UV and heat resistance up to 190°C
- Rapid curing allows rapid handling of bonded components
- Deep polymerization
-
- Two-component adhesive sealant
- Rapid polymerization at room temperature
- Neutral alkoxide polymerization
- Pasty, non-self-levelling consistency
- Good and durable adhesion
- Excellent weather, UV and heat resistance up to 190°C
- Rapid curing allows rapid handling of bonded components
- Deep polymerization
-
No mixing required No exotherm of reaction during curing Excellent adhesion without primer on many substrates Excellent performance over a wide temperature range Polymerizes into low-stress soft elastomers Controlled volatility (controlled migration of silanes)
-
- Meets BS 476 Part 22 standard
- Excellent primerless adhesion on most substrates
- porous and non-porous buildings
- It does not drip
- Joint movement capacity ±50%
- Neutral curing system
- Halogen-free
- Complies with ISO 11600-F&G-25LM Standard
- A fire resistance value of up to 4 hours can be obtained
- Extensively tested on many European specifications
- Out of footprint in 1.5 hours
- Excellent weathering characteristics, including resistance to ozone, UV radiation and extreme temperatures
- Long service life
- CE marked as fire resistant according to ETAG 026
-
- Superior sealing characteristics when exposed to fuels and oils
- Easily injected and reinjected
- Does not harden
- Good grip
- Essentially unaffected by shock, vibration, and thermal cycling
- Contains no hardeners or curing agents
- Withstands immersion in fuels and exposure to fuel vapors at temperatures up to +200°C
- Contains flow control particles
- Excellent flow characteristics allow faster injection at lower pressures.
-
- Moderate thermal conductivity
- One part: no ovens or curing required
- Pulls heat away from critical components
