Products
Showing 221–240 of 577 results
Filtri
Tipo di prodotto
- 1 Anaerobic activator
- 9 Anaerobic adhesive
- 23 Anti friction coating
- 8 Cleaner
- 2 Cleaners
- 5 Compound
- 1 Conductive paints
- 19 Conformal coating
- 7 Dispersions
- 49 Elastomeric adhesive
- 5 Electrically conductive adhesives
- 16 Electronics adhesive
- 2 Gap filler
- 8 Gel
- 93 Greases
- 10 Heat-conductive adhesive
- 3 Hot-Melt Stickers
- 7 Instant adhesive
- 72 Oils
- 20 Pastes
- 13 Primer
- 31 Resins and encapsulants
- 3 Solid lubricant
- 2 special
- 40 Structural adhesive
- 6 Thermal conductive paste
Marchio
Tecnologia
Applicazioni
The data on this page are to be considered purely indicative and do not constitute a technical data sheet.
-
- Rapid polymerization in RT, without notches
- Not smooth
- Higher thermal conductivity
- Controlled volatility of silicone
- No mixing required
- Polymerization at room temperature
- Faster processing at room temperature
- Used if increased flame resistance is required
-
- Rapid polymerization in RT
- Mellow
- High elongation
- Controlled volatility of silicone
- Single-component - No mixing required
-
- Volatility-controlled silicone
- Polymerizes into a soft and elastic elastomer
- No solvent added
- Single-component - No mixing required
- Polymerization at room temperature
-
- Rapid polymerization
- Very low viscosity
- Controlled volatility of silicone
- Solvent-free
- Excellent smoothness, filling or self-leveling after distribution
- Polymerizes into a soft, low-stress elastomer
- Coating can improve reliability against stresses
-
- Mellow
- Controlled volatility of silicone
- Single-component - No mixing required
- Polymerization at room temperature
- Self-extinguishing UL94 V-0
-
- Rapid polymerization
- Sliding
- Polymerizes into a soft, low-stress elastomer
- Controlled volatility of silicone
- No solvent added
- Polymerization at room temperature
- Faster processing at room temperature with thermal acceleration
- Soft coating can improve reliability against stresses
- Can be used if flame resistance required
-
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Good adhesion on many substrates
-
- Can be used as a printable PAD
- Can replace the traditional manufactured pad
- Use as a gap filler
- Dispensed or printed through manual or automated processes
- Deposit of features for precise coverage of components
- Lower cost of ownership than manufactured pads
- Excellent thermal performance
- Soft, stress-relieving and shock-dampening
- Reworkable
-
- Mixing ratio mixture 1:1
- Thermally conductive silicone
- Platinum curing system
- Polymerization at room temperature
- Provides long-term stability
- Polymerizes without exothermia
- Thixotropic, non-sagging
- Resistant to ozone and ultraviolet degradation
- Provides high cooling performance
-
- Polymerization at room temperature
- Long-term performance stability up to 150°C
- Low compression stress
- Maintains upright position (cured or uncured state)
- Controlled volatility of silicone
-
- Solvent-free formulation
- Sliding
- Does not polymerize
- Able to achieve bond line thickness
- Very low thermal resistance
- High thermal conductivity
- Wicks heat away from sensitive components
-
- Good thermal conductivity
- Low oil bleed
- Stable at high temperatures
-
- Polymer matrix helps reduce pump out
- Fluid
- Good thermal conductivity
- Low thermal resistance
- Does not polymerize
- Heat removal from PCB system components
- Possible to obtain bond line thickness (BLT).
-
- Solvent-free formulation
- Easy application
- Low thermal resistance
- High thermal conductivity
- Good stability and reliability
-
- Two-component thermal conductive encapsulant
- Suitable for PCB system
- Protection in harsh environmental and thermal conditions
- Can be used at room temperature
- Used in the production of electrical products, PCBs and modules
- Good adhesion to aluminum
- Excellent dielectric properties
- Good smoothness
- Easy dispensing
- Good flexibility for easy processing
- Good adhesion without the use of primer
-
- Transparent coating with excellent clarity
- UV resistant
- Ideal for LED applications
- Reduces operational risks
- Free of aromatic solvents such as toluene and xylene
- Efficient application of coating at room temperature
- Ideal for applications requiring rework
- Can be removed with ULS
-
- Provides excellent adhesion to all substrates
- Good temperature range and dielectric properties
- Can be welded through the UV track for easy inspection
- Can be removed with solvents such as Ultrasolve (ULS)
- Cheap
- Enables efficient application
- Fast drying time
-
- Excellent resistance to harsh environments
- Protects contacts from corrosion
- Excellent electrical performance
- Ideal for high voltage contacts
- Ensures reliability of contact
- Provides optimal mechanical strength and reduces electrical background noise
-
- Alkyd conformal coating
- Low VOC
- Specific for the protection of electronic circuits
- Suitable for use in extreme temperatures
- Better performance at high temperatures
-
- Allows the PCB design to be camouflaged
- High resistance to chemicals and solvents
- Extremely wide operating temperature range
- Resistant to solvents from the automotive and aerospace industries
- The hardened coating can be removed with Electrolube
