Product Type for Industrial Adhesives

Elastomeric sealant adhesives

Learn about Mascherpa’s range of elastomeric sealant adhesives.

Silicone sealant adhesives

Polyurethane sealant adhesives

MS Sealing Adhesives

Introduction

Elastomeric sealant adhesives are characterized by high elongations that generate reduced stress on even dissimilar substrates under different expansion coefficients, shocks and vibrations. For this reason, elastomeric sealant adhesives can give better performance than traditional assembly methods such as rivets, screws, bolts, and welds that may be inadequate.

Elastomeric sealing adhesives in addition to the function of joining substrates provide a perfect barrier to infiltration of external contaminants that could degrade the joint.

Ask the expert for more information

Main properties of elastomeric sealant adhesives

They guarantee elongations of up to 700%.
Appreciable tensile loads
High resistance to peeling
Distribute the applied load over the entire joint area
Absorb high stresses without stressing the joint
They offer excellent thermal resistance

Ask the expert for the best product to solve your problem

Evenly distribute the forces

Elastomeric sealant adhesives allow forces to be evenly distributed over the entire bonded area; without stressing more fragile substrates. Imagine the difficulty of screwing a pane of glass onto an aluminum frame: only the slightest vibrations would produce glass breakage.

Ask the expert for the best product to solve your problem

Replace the preformed gaskets

Elastomeric sealant adhesives can replace preformed gaskets by reducing production and inventory costs, one product instead of countless part numbers, the contents of one cartridge instead of gaskets of different shapes and sizes.

Ask the expert for the best product to solve your problem

Products

Read more Quick View
Ködiplast CS
- Butyl with high vapor tightness and excellent external durability
- Specific for long-term moisture and weather protection
- Suitable for static joints, prefabrication, vehicles and insulation
- Elastoplastic sealant for construction and industry
- Simple and precise application
- Good compatibility with many substrates
Read more Quick View
Ködisil 110T
- Oximal cross-linking transparent silicone sealant
- High resistance to UV, aging and weathering
- Excellent permanent elasticity
- Excellent adhesion on glass, metal, plastic and paint
- Odorless, MEKO-free
- Compatible with painted surfaces
- Non-corrosive
Read more Quick View
Ködisil HAC-A
- Transparent acetic silicone for wet environments
- Ideal for structural glass, aquariums and glass-cement walls
- High chemical and thermal resistance
- Strong adhesion on glass and ceramics
- Excellent elasticity
- Good resistance to weathering
Read more Quick View
Ködiplast CT 100
- Butyl-based plastic sealant for nonstructural applications
- High resistance to weathering
- Suitable for glass, wood, concrete and other porous materials
- Good adhesion without primer
- Easily moldable and workable
- Manual removal of excess material
- Can be used in construction and industry
Read more Quick View
Körapur 672 S
- Very high mechanical strength
- Excellent adhesion on difficult substrates
- Good elasticity
- Resistance to low and high temperatures
Read more Quick View
Ködisil N Transparent
- MEKO-free transparent neutral silicone sealant
- Fungicide formula for indoor and outdoor environments
- Excellent compatibility with paints
- High adhesion on porous and non-porous materials
- Odorless and easy to apply
- Weatherproof and moisture resistant
Read more Quick View
Körapur 672 NV
- High tensile and shear strength
- Good adhesion on metals and plastics
- Excellent thermal and mechanical resistance
- Good elasticity
Read more Quick View
Körapur 666
- Low density and low viscosity
- No shrinkage during crosslinking
- Good adhesion
Read more Quick View
Körapur 489
- High module
- Mechanical strength
- Adhesion on metals and synthetics
- Adjustable pot life
Read more Quick View
Körapop 257
- Excellent balance between stiffness and flexibility
- Good adhesion on a variety of materials
- High resistance to weather and climate
- Permanent elasticity
- Easy to apply
- Non-corrosive
- Single-component
Read more Quick View
Körapop 250
- Maximum tensile and shear strength
- Specific for demanding technical bonding
- Suitable for joints subjected to vibration and dynamic stresses
- Fast curing for rapid production cycles
- Excellent adhesion on rigid materials
Read more Quick View
Körapur 480
- Excellent adhesion
- High mechanical strength
- High module
- Solvent-free
Read more Quick View
Körapop 240/2K
- Two-component high-performance adhesive
- High mechanical and environmental resistance
- Rapid crosslinking and control of processing time
- Ideal for structural applications in harsh environments
- Non-corrosive, solvent-free
Read more Quick View
Körapur 140
- High adhesion strength
- Excellent elasticity
- Suitable for semi-structural and flexible bonding
- Excellent resistance to moisture and weathering
- Good adhesion to many surfaces: metals, plastics, glass, composites, wood, painted surfaces
- Non-sticky - thixotropic
- Single component, cures at room temperature
- Available in black, white and gray
- No sagging effect
Read more Quick View
Körapop 240
- Single-component for sealing in demanding environments
- Excellent thermal and mechanical resistance
- Multi-substrate adhesion without primer
- Flexible and resistant to vibration
- Compatible with many paints
Read more Quick View
Körapur 842
- High flexibility even at low temperatures
- No significant shrinkage
- Wide range of pot life
- High impact force
Read more Quick View
Körapop 235
- MS adhesive sealant
- Excellent climatic resistance
- Suitable for outdoor environments exposed to temperature changes
- High adhesion on metals, plastics, glass and minerals
- Wet cross-linking, non-corrosive
- Durable elasticity
Read more Quick View
Körapop 228
- Self-levelling agent with good thermal resistance
- Suitable for horizontal applications
- Excellent adhesion on technical materialsResistant to weather and chemicals
- Excellent elasticity even in critical environments
Read more Quick View
Körapur 840
- High impact force
- No significant shrinkage
- Customizable pot life
Read more Quick View
Körapop 225/2K
- Two-component with excellent mechanical performance
- Permanent elasticity and rapid cross-linking
- Can be used for elastic structural bonding
- Resistant to weathering and humidity
- Suitable for splices on metals, plastics, composites
Read more Quick View
Körapop 225
- Flexible polymeric MS for bonding and sealing
- High elasticity and adhesion on rigid materials
- Excellent compatibility with wet-on-wet paints
- Good workability, even in exposed environments
- Resistant to climate and aging
Read more Quick View
Körapur 784
- High mechanical strength
- No significant shrinkage
- Flexible
- Wide range of pot lives available
Read more Quick View
Körapop 220
- MS polymer one-component adhesive
- Excellent adhesion on steel, plastics, glass, wood
- Resistant to extreme temperatures and humidity
- Odorless and compatible with painted surfaces
- Elastic and weather resistant
- Easily applied even on vertical surfaces
Read more Quick View
Körapur 125
- High elongation at break (500%)
- Excellent tear and tensile strength
- High adhesion on metals, glass, rigid plastics, composites, wood
- Excellent weather resistance
- Can be used between -60 °C and +120 °C (short periods)
- Good paintability
- Single-component
Read more Quick View
Körapop 216
- One-component modified silane polymer
- Excellent resistance to moisture, weather and temperature
- Flexible and easy to apply
- Adhesion on metals, plastics, minerals
- Resistant to vibration and shock
- Non-corrosive, solvent-free
Read more Quick View
Körapop Transparent
- High adhesion transparent sealant
- MS transpiring
- ISEGA certificate for direct food contact
- Excellent moisture and UV resistance
- Permanent elasticity and invisible aesthetic finish
- Suitable for glass, metal, plastic and wood
- Good dimensional stability
- Simple application
- Single-component
Read more Quick View
Körapur 115FC
- Excellent elasticity and ability to absorb movement
- Excellent resistance to climate, humidity, high and low temperatures
- Adhesion on steel, aluminum, rigid plastics, wood, mineral surfaces
- Applicable with cartridge or dispenser systems
- Can be used indoors and outdoors
- Easy to spread and thixotropic
- Single-component
Read more Quick View
Körapop ALU
- Sealing adhesive with aluminum content
- Antimold
- Metallic appearance for aesthetic finish
- Good resistance to weathering
- Permanent elasticity
- Excellent adhesion on various materials, including metals and minerals
- UV resistant
- Single-component
Read more Quick View
Körapop 337
- High elasticity and ability to move
- Excellent elongation at break (up to 600%)
- Good adhesion on different materials (plastic, metal, wood, glass)
- Resistant to weathering and aging
- Simple and safe application
- Non-corrosive
- Single-component
Read more Quick View
Körapur 115
- Flexible even at low temperatures
- Good tensile and tear strength
- Excellent resistance to moisture and weathering
- Compatible with rigid plastics, metals and wood
- Non-corrosive
- Permanent elasticity
- Simple application
- Single-component
Read more Quick View
Körapur 030
- Single-component: ready to use, hardens with ambient humidity
- High elasticity and excellent elongation at break
- Excellent adhesion on different surfaces: rigid plastics, metals, glass, wood
- Moisture and weather resistant, ideal for outdoor use
- Non-corrosive, also suitable on sensitive materials
- Compatible with many substrates, with no need for primer in many cases
- Low isocyanate content
- Free of hazard labeling (labeling free): no GHS pictograms or risk phrases
- CE Certificate
Read more Quick View
Körapur 790
- Very high mechanical strength
- Low permanent deformation
- High elastic modulus
- No shrinkage during curing
- Available with different pot life times (6, 15, 30 min)
- Good adhesion on rigid plastic, steel, aluminum, composites
- Suitable for sandwich elements and structures subjected to dynamic loads
- Two-component
Read more Quick View
Körapren FU 36
- Good initial adhesion
- Contact application on both surfaces
- Can be used on absorbent and nonabsorbent surfaces
- Suitable for ores and metals
- Good resistance to moisture conditioning
- Not suitable for soft plastic or PE
- Can also be applied to vertical surfaces
- Ready to use
Read more Quick View
Körapop 330
- High adhesion strength and good tensile strength
- Good elasticity even after curing
- High green strength for rapid initial bonding
- Excellent resistance to moisture, weathering and UV rays
- Suitable for different surfaces: metal, plastic, glass, wood, minerals, composites
- Resistant to mechanical stress
- Non-corrosive
- Single component, room temperature curing agent
- Available in black, white and gray
Read more Quick View
Körapop 316
- Flexible and elastic after curing
- Good resistance to UV light and aging
- Excellent adhesion on metals, plastics and glass
- Paintable and isocyanate-free
- Good stability under severe environmental conditions
- Non-corrosive
- Single-component
Read more Quick View
Körapop 315
- Permanent elasticity even at low temperatures
- Excellent UV and weather resistance
- Adhesion on metals, plastics, wood, glass and mineral materials
- Suitable for indoor and outdoor use
- Paintable
- Non-corrosive
- Single-component
Read more Quick View
Körapop 215
- Good resistance to moisture
- Excellent climate resistance
- Applicable with spray guns
- Slightly thixotropic
- Sprayable with suitable spray guns
- Can be used as soundproofing on various materials
- Paintable up to 2 hours after application
Read more Quick View
SILASTIC™ RBL-9694-45M Liquid Silicone Rubber
- Addition-curing two-component silicone elastomer
- Easy-to-use and easy-to-manage 1:1 mixing ratio
- High tear resistance
- Low compression set
- Good adhesion to many substrates
- Hardness suitable for sealing applications with high clamping loads
- The non-sagging nature allows for accurate and uniform seal beads of precise dimensions as defined by the robot application parameters.
- Does not require solvents, CFCs or other environmentally harmful materials for processing
Read more Quick View
XIAMETER™ SLT-3445 Sealant Acetoxy Red Flowable
- Self-levelling liquid, suitable for spraying or dipping
- Excellent release properties
- Temperature stability up to 500°F (260°C), intermittent use up to 572°F (300°C)
- Good adhesion without primer to a variety of metals
Read more Quick View
Merbenit SK212
- Very high initial adhesion
- Free of solvents, isocyanates and silicones
- Adjustable
- Complete and rapid curing
- Very high mechanical strength
- Excellent sealing properties
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Chemically neutral polymerization
- Short-term resistant up to +200°C for powders and thermal coatings.
- Thermal
- Non-corrosive on surfaces
- Shock and vibration resistant (absorbs shock)
- Resists thermal expansion and material tension
Read more Quick View
Merbenit TS40
- Simple processing
- Easy finishing and cleaning
- Free of solvents, isocyanates and silicones
- Wide spectrum of adhesion
- Odorless
- Compatible with paints
- Excellent sealing properties
Read more Quick View
Merbenit ST40
- Sprayable
- Long time open
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Resistant up to +200°C for powder and thermal coatings
- Adjustable
- It fills in the gaps and cracks
- Permanently elastic
- Excellent sealing properties
- Non-corrosive on surfaces
- Vibration absorption
Read more Quick View
Merbenit SF50
- High ultimate strength
- Simple processing
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Chemically neutral polymerization
- Compatible with paints
- Resistant up to +200°C for powder and thermal coatings
- Adjustable
- Excellent sealing properties
- Non-corrosive on surfaces
- Vibration absorption
Read more Quick View
Merbenit PC200
- Short-term resistant up to + 240°C
- High ultimate strength
- Simple processing
- Free of solvents, isocyanates and silicones
- Very wide range of adhesion
- Odorless
- Compatible with paints
- Adjustable
- Excellent sealing properties
- Non-corrosive on surfaces
- Corrosion protection
- Absorbs shock
Read more Quick View
Merbenit HM21
- Compatible with paints
- Simple processing
- High elasticity, good mechanical strength
- Long time open
- Free of solvents, isocyanates and silicones
- Odorless
- Chemically neutral polymerization
- Non-corrosive on surfaces
- Absorbs vibrations
- Sandable and paintable
- Very wide range of adhesion
- Excellent sealing properties
Read more Quick View
BETASEAL™ 1965-1F
- It has a wide application coverage and can also be used without primer on automotive paints.
- It exhibits excellent sag and bead stability.
- Skin formation and curing depend on the humidity, temperature, and size of the application.
Read more Quick View
BETASEAL™ 1812
- It has high viscosity and medium modulus that can be used without primer on paints for selected painting technologies.
- Provides high initial handling force to maintain the position of bonded parts.
- Solvent-free.
- It shows excellent stability of the bead and sagging effect.
- Skin formation and curing depend on the humidity, temperature and size of the application.
Read more Quick View
BETASEAL™ 8000-1F
- Medium viscosity, low modulus glass adhesive with excellent UV stability characteristics.
- It can be used without primer on the paint for some paint technologies.
- Solvent-free
- It shows excellent stability to sagging and chords. Skin formation and curing depend on humidity, temperature, and application size.
Read more Quick View
BETAMATE™ 2810 SV
- Good adhesion to plastics, composites, and painted surfaces
- Good adhesion to coated metal surfaces
- Accelerated adhesion at high temperatures
- High mechanical strength and elongation at break
- Low dependence of the module on temperature
- Glass transition temperature outside the scope of application
Read more Quick View
BETAMATE™ 2810 LV
- Good adhesion to plastics, composites, and painted surfaces
- Good adhesion to coated metal surfaces
- Accelerated adhesion at high temperatures
- High mechanical strength and elongation at break
- Low dependence of the module on temperature
- Glass transition temperature outside the scope of application
Read more Quick View
BETASEAL™ 1001EM
- One-component adhesive that cures at room humidity
- For direct glazing applications.
- Excellent stability
- Cord stability
- Skin formation and hardening depend on humidity, temperature and size
- Safety time of 3 hours
Read more Quick View
BETASEAL™ 1130
- One-component adhesive that cures at room humidity
- For direct glazing applications.
- Excellent stability
- Cord stability
- Skin formation and hardening depend on humidity, temperature and size
- Safety time of 2 hours
Read more Quick View
BETALINK™ K1
- Single-component, polyurethane-based adhesive that is highly elastic and moisture-curing.
Read more Quick View
BETAFILL™ 10211
- They are excellent sealants for automotive repair.
- They allow gluing, grouting and sealing.
- Compatible with almost all paint systems.
- DOW AUTOMOTIVE products are developed in cooperation with automakers.
Read more Quick View
BETAFILL™ 10215
- They are excellent sealants for automotive repair.
- They allow gluing, grouting and sealing.
- Compatible with almost all paint systems.
- DOW AUTOMOTIVE products are developed in cooperation with automakers.
Read more Quick View
BETAFORCE™ 2850L
- Good adhesion to plastics, composites, and painted surfaces
- Good adhesion to metal surfaces with e-coat
- Accelerated polymerization at elevated temperatures
- High mechanical strength and elongation at break
- Low dependence of the module on temperature
- Glass transition temperature outside the application range
Read more Quick View
BETAMATE™ 1100N-1F
- Excellent adhesion to automotive steels
- It helps to increase or restore the stiffness and impact stability of the entire car body.
- High durability of the adhesive bond
- Protects metal and welding spots from corrosion
- Compatible with other mechanical and thermal joining techniques
Read more Quick View
BETAFILL™ 10210
- They are excellent sealants for automotive repair.
- They allow gluing, grouting and sealing.
- Compatible with almost all paint systems.
- DOW AUTOMOTIVE products are developed in collaboration with the houses
- automotive.
Read more Quick View
DOWSIL™ Q3-3526 Base and Catalyst
- Rapid handling of bonded components: rapidly develops adhesive strength at room temperature, enabling rapid handling of components.
- Adheres to suitably prepared polypropylene.
- Two-component system with 10:1 mixture ratio by weight. Non-corrosive and low-odor curing.
- It contains no solvents.
- The non-lumpy nature of the mixture allows the extruded bead to remain in place without flowing.
- Excellent resistance to weathering, UV rays and heat up to 190°C.
- Available in two color versions: Gray (RAL 7038) and Black (RAL 7016).
Read more Quick View
DOWSIL™ Q4-2805 Fluorosilicone Channel Sealant
- Superior sealing characteristics when exposed to fuels and oils
- Easily injected and reinjected
- Does not harden
- Good grip
- Essentially unaffected by shock, vibration, and thermal cycling
- Contains no hardeners or curing agents
- Withstands immersion in fuels and exposure to fuel vapors at temperatures up to +200°C
- Contains flow control particles
- Excellent flow characteristics allow faster injection at lower pressures.
Read more Quick View
DOWSIL™ EA-2626 / Silastic™ Q3-3636
- Two-component adhesive sealant
- Rapid polymerization at room temperature
- Neutral alkoxide polymerization
- Pasty, non-self-levelling consistency
- Good and durable adhesion
- Excellent weather, UV and heat resistance up to 190°C
- Rapid curing allows rapid handling of bonded components
- Deep polymerization
Read more Quick View
BETAMATE™ 7120
- Cold workable
- Medium viscosity
- Low modulus adhesive Excellent UV stability characteristics
- Solvent-free, for direct glazing applications.
- It exhibits excellent elasticity.
Read more Quick View
DOWSIL™ 3-6096 Adhesive
- Addition curing system
- Cures into a durable and flexible rubber
- Excellent adhesion to a wide range of substrates such as glass, metals and plastics
- Rapid thermal polymerization
- Excellent heat resistance (up to 250ºC)
Read more Quick View
DOWSIL™ 3-8219 RF Silicone Foam
- Medium hardness (Shore 00)
- Promotes application on sloping surfaces
- Easy to use
- Mixing ratio
- Rapid polymerization at room temperature
- It does not require temporary storage of the
- equipped parts
- Low compression set maintained at high service temperatures
- Stable and flexible over a wide range of temperatures
Read more Quick View
DOWSIL™ 832 Multi-Surface Adhesive Sealant
- 100% silicone
- Superior adhesion to a wide variety of surfaces
- Low odor
- Neutral polymerization (alcohol)
- Does not corrode metal or other sensitive materials
- Forms a flexible and long-lasting seal
Read more Quick View
DOWSIL™ 3-8259 RF Silicone Foam
- Medium hardness (Shore 00)
- Reduced flow favors application on sloping surfaces
- Easy to use, handy 1:1 mixing ratio
- Rapid curing at room temperature, with no need for temporary storage of the equipped parts
- Low compression set that is maintained at high service temperatures service temperatures
- Stable and flexible over a wide range of temperatures
Read more Quick View
DOWSIL™ 93-006-1 RF Sealant & Kit
- High viscosity
- Lump-free
- High performance
- Adheres well to primed surfaces
Read more Quick View
DOWSIL™ Q3-1566 Heat Resistant Adhesive/ Sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Good adhesion on many substrates
Read more Quick View
DOWSIL™ Silicone AP Adhesive Sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Good adhesion on many substrates
Read more Quick View
DOWSIL™ 6-1104 Controlled Volatility Sealant
- Not smooth
- Low levels of volatile condensable materials
- High elongation for greater stress reduction
- No mixing required
- Faster inline machining with optional thermal acceleration
- Proven for space applications
Read more Quick View
DOWSIL™ FIRESTOP 700 Silicone Sealant
- Meets BS 476 Part 22 standard
- Excellent primerless adhesion on most substrates
- porous and non-porous buildings
- It does not drip
- Joint movement capacity ±50%
- Neutral curing system
- Halogen-free
- Complies with ISO 11600-F&G-25LM Standard
- A fire resistance value of up to 4 hours can be obtained
- Extensively tested on many European specifications
- Out of footprint in 1.5 hours
- Excellent weathering characteristics, including resistance to ozone, UV radiation and extreme temperatures
- Long service life
- CE marked as fire resistant according to ETAG 026
Read more Quick View
DOWSIL™ EA-3838 Fast Adhesive
- Fast and homogeneous deep polymerization
- Early adhesion at room temperature
- Pasty, non-self-levelling consistency
- Rapid handling of bonded components
- Fast assembly process
- Durable adhesion to a wide variety of substrates
- Excellent resistance to weathering and U.V. rays.
Read more Quick View
DOWSIL™ 3525 Adhesive Sealant
- Adhesion to metals and plastics
- Weathering resistance
- UV resistance
- Non-corrosive
- Neutral polymerization
- Not oily
- Ready to use
- Short time of no adherence
- Solvent-free: low shrinkage
- Good mechanical properties: high
- Tear resistance
- Elongation resistance
- Tensile strength
Read more Quick View
DOWSIL™ 7092 High Green Strength Adhesive and Sealant
- Provides instant green force
- Easy-to-use one-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Excellent adhesion to a wide range of substrates such as glass, metals and plastics
- Pasty and non-sticky consistency
- Cures into a durable and flexible rubber
- Stable and flexible from -50°C to +150°C
- UL 94 HB
- Rapid resistance formation promotes increased productivity due to rapid handling of bonded units
- Saves time because no buffer is needed for increasing resistance
Read more Quick View
DOWSIL™ 752 Adhesive Sealant
- Single-component adhesive/sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Good adhesion on many substrates
- Stable and flexible from -50°C (-58°F) to 180°C (356°F)
Read more Quick View
DOWSIL™ 748 Non-Corrosive Sealant
- Can be used in corrosion-sensitive electrical equipment and PCB systems without adverse effects
- Easy to handle
- UL Classified
- Non-corrosive
- Low odor
- Cures at room temperature
Read more Quick View
DOWSIL™ 738 Electrical Sealant
- Not smooth
- Polymerization at room temperature
- High elongation for greater stress reduction
- No mixing required
- Polymerization at room temperature, no need for ovens
- Faster inline machining with optional thermal acceleration
- Improved reliability through reduced curing stresses
- Automated or manual needle dispensing systems
Read more Quick View
DOWSIL™ 730 FS Solvent Resistant Sealant
- One-component fluorosilicone sealant adhesive.
- It cures at room temperature when
- exposed to moisture in the air
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Good adhesion to many substrates
- Stable and flexible from -65°C (-85°F) to 260°C (500°F)
- Retains its properties when exposed to fuels, oils and solvents
Read more Quick View
DOWSIL™ 7094 Flowable Sealant
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Fluid and self-leveling
- Easy to apply
- Excellent primerless adhesion to many substrates
- Stable and flexible from -50°C to +180°C
- Non-corrosive to metals
- Low odor
- Primerless adhesion to mixed substrates
Read more Quick View
DOWSIL™ AS 7096N Sealant Clear
- Single-component adhesive/sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Excellent primerless adhesion to many substrates
- Non-corrosive for metals
- Stable and flexible from -50°C to +150°C
Read more Quick View
DOWSIL™ 732 Multi-Purpose Sealant
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Good adhesion to many substrates
- Stable and flexible from -60°C to +180°C (-76°F to +356°F), with short peaks up to +205°C (401°F)
- Black version: stable and flexible from -60°C to +205°C (-76°F to +401°F), with short peaks up to +230°C (446°F)
- Excellent dielectric properties
Read more Quick View
DOWSIL™ 734 Flowable Sealant
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Acetoxy polymerization system
- Fluid and self-leveling
- Easy to apply
- Cures into a durable and flexible rubber
- Rapid no-grip time
- Good adhesion to many substrates
- Stable and flexible from -65°C (-85°F) to +180°C (+356°F)
- Excellent dielectric properties
Read more Quick View
DOWSIL™ 736 Heat Resistant Sealant
- It does not sag and drip
- Can be applied overhead or on side walls
- Can be used in applications with continuous exposure at 260°C (500°F) and intermittent exposure at 315°C (600°F)
Read more Quick View
DOWSIL™ 7091 Adhesive Sealant
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Excellent adhesion to many substrates
- Stable and flexible from -40°C (-40°F) to 180°C (356°F)
Read more Quick View
DOWSIL™ 7093 Adhesive Sealant
- One-component adhesive sealant
- Cures at room temperature when exposed to moisture in the air
- Alkoxy polymerization system
- Pasty consistency, does not bag
- Easy to apply
- Low modulus for high movement capacity
- Good adhesion on many substrates
- Stable and flexible from -50°C (-58°F) to +180°C (+356°F)
Read more Quick View
DOWSIL™ EA-2626 Adhesive
- Two-component adhesive sealant
- Rapid polymerization at room temperature
- Neutral alkoxide polymerization
- Pasty, non-self-levelling consistency
- Good and durable adhesion
- Excellent weather, UV and heat resistance up to 190°C
- Rapid curing allows rapid handling of bonded components
- Deep polymerization

All products Elastomeric adhesives

Filter products by their attributes: brand, technology, applications…

Reference categories for the Elastomeric adhesives

Continue browsing the Mascherpa site

Technology

MS Sealing Adhesives

Polyurethane sealant adhesives

Silicone sealant adhesives

Surfaces

Composites

Plastic

Metals

Brands

Xiameter

Silastic

Merbenit

Dowsil

Dupont

Latest articles on the Elastomeric adhesives

Sign up for newsletter to receive upcoming articles

HVAC

HVAC Systems Bonding: H.B Fuller Adhesive Solutions

DOWSIL sealing silicones in Giottiline applications

Fire protection of electric vehicle batteries

PDF

Read PDFs on the Elastomeric adhesives

There are no PDFs yet for:
Elastomeric adhesives , ask the expert if you need an SDS or Data Sheet

Industries

Select your product starting with the relevant industry.

Ask the expert

Do you need support?