Showing 121–140 of 254 results
Filtri
Tipo di prodotto
- 1 Anaerobic activator
- 9 Anaerobic adhesive
- 8 Cleaner
- 48 Elastomeric adhesive
- 5 Electrically conductive adhesives
- 3 Hot-Melt Stickers
- 7 Instant adhesive
- 13 Primer
- 3 Resins and encapsulants
- 40 Structural adhesive
Marchio
Tecnologia
Applicazioni
-
- Polymerization: instant and light curing (dual cure)
- Polymerized with visible and UV-LED light
- Long open time without activation
- Curing surfaces dry to the touch and free of stickiness
- On-demand polymerization of excess material released from splice lines
- Bonding, filling, reconstruction and coating
- Low odor and low bloom
- Highly flexible and elastic (Light Lock 30X)
- Adhesion to multiple substrates
- Available in a range of viscosities
-
- Instant and light-curing polymerization (dual cure)
- Fixing time in 60 s (without exposure to light)
- Polymerizable with visible light and UV-LED <5 sec
- Long opening time without activation
- Dry to the touch, surface curing without adhesiveness
- On-demand polymerization of excess material released from weld seams
- Bonding, filling, reconstruction and coating
- Low odor and low effervescence
-
- Suitable for all types of threaded metal pipes and fittings
- Prevents leakage and/or loosening of parts due to vibration and shock
- Medium strength
- Medium viscosity and thixotropy
- Instantaneous low-pressure sealing
- 100% connection - no slack
- Resistant to vibration
- Corrosion prevention
- Single component
- Suitable for active and passive metals
-
- Medium strength
- High viscosity
- Instant seal 10bar
- High pressure seal - 350bar
- 100% connection - no slack
- Resistant to vibration
- Corrosion prevention
- Single component
- Suitable for active and passive metals
-
- Very low viscosity
- Excellent wettability on low surface energy substrates
- Improves adhesion to difficult-to-bond substrates
- Specially formulated for the adhesion of polyolefins
- Suitable for use with other cyanoacrylates
- Dries in seconds
- Increases adhesion strength
-
- Fixing time in 60 seconds
- Hardens in 5-10 minutes
- Instant adhesion with high bond strength
- Low volumetric contraction: 4.3 percent
- Fills empty spaces of large volumes
- Bonding a wide range of materials
- Workable, sandable and paintable once cured
- Impact resistant
- The gel allows for precise application
- Non-drip for vertical applications
-
- High strength
- Low viscosity
- High power transmission
- Resistance to dynamic loads
- Resistant to vibration
- Recommended for gaps up to 0.15 mm
- Corrosion prevention
- Single component
-
- High strength
- High viscosity
- High power transmission
- Resistance to dynamic loads
- Vibration resistance
- Corrosion prevention
- Recommended for gaps up to 0.2 mm
- Single component
- Suitable for active and passive metals
-
- High strength
- Medium viscosity
- High power transmission
- Resistance to dynamic loads
- Recommended for gaps up to 0.15 mm Vibration resistant
- Corrosion prevention
- Single component
- Suitable for active and passive metals
-
- High strength
- High viscosity / Paste
- High gap filling (up to 0.5 mm)
- High power transmission
- Resistance to dynamic loads
- Vibration resistance
- Corrosion prevention
- Single component
- Suitable for active and passive metals
-
- Grip time 30 seconds
- High adhesion strength: > 6 MPa after 5 min
- Open time 25 minutes
- Filling gaps between substrates up to 5 mm
- Excellent adhesion to a wide variety of substrates
- Translucent when cross-linked
- Resistant to temperature and humidity
- Gel consistency for precise dosing
-
- High adhesion strength
- Long time open
- Low blooming
- Less brittle than conventional instant adhesives
- They glue a wide range of materials, including polystyrene
-
- Two-component syntactic epoxy system
- Medium density and low specific weight
- High mechanical strength
- Pourable
- Designed for honeycomb structure reinforcement and potting
-
- Improves adhesion of silicone sealants to many substrates
- Provides more uniform and stronger bonds
- Complies with South Coast and Bay standards
- South Coast and Bay Area Air Management District.
- Primer for architectural sealants
- Low VOC at 76 g/l
- Formulated for low toxicity
- The OS solvent used does not deplete the ozone layer. OS = Ozone Safe
- The primer is suitable for Waterproofing and structural applications for glazing applications
-
- Addition curing system
- Cures into a durable and flexible rubber
- Excellent adhesion to a wide range of substrates such as glass, metals and plastics
- Rapid thermal polymerization
- Excellent heat resistance (up to 250ºC)
-
- Medium hardness (Shore 00)
- Promotes application on sloping surfaces
- Easy to use
- Mixing ratio
- Rapid polymerization at room temperature
- It does not require temporary storage of the
- equipped parts
- Low compression set maintained at high service temperatures
- Stable and flexible over a wide range of temperatures
-
- Medium hardness (Shore 00)
- Reduced flow favors application on sloping surfaces
- Easy to use, handy 1:1 mixing ratio
- Rapid curing at room temperature, with no need for temporary storage of the equipped parts
- Low compression set that is maintained at high service temperatures service temperatures
- Stable and flexible over a wide range of temperatures
-
- Adhesion to metals and plastics
- Weathering resistance
- UV resistance
- Non-corrosive
- Neutral polymerization
- Not oily
- Ready to use
- Short time of no adherence
- Solvent-free: low shrinkage
- Good mechanical properties: high
- Tear resistance
- Elongation resistance
- Tensile strength
-
- Not smooth
- Low levels of volatile condensable materials
- High elongation for greater stress reduction
- No mixing required
- Faster inline machining with optional thermal acceleration
- Proven for space applications
-
- One-component adhesive sealant
- Cures at room temperature when exposed to air humidity
- Alkoxyl polymerization system
- Pasty and non-sagging consistency
- Easy to apply
- Cures into a durable and flexible rubber
- Excellent adhesion to many substrates
- Stable and flexible from -40°C (-40°F) to 180°C (356°F)
